logo
NOTICE:  This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the Lost Password feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Axis repositioning- how? (#1044)
Options
Go to last post Go to first unread
Previous Topic Next Topic
ttrw  
#1 Posted : Wednesday, May 21, 2008 10:28:47 AM(UTC)
ttrw

Rank: Senior Member

Joined: 4/1/2007(UTC)
Posts: 1,583

Was thanked: 2 time(s) in 2 post(s)
This is probably one which is totally obvious, but how is it possible to reposition the axis (which is currently set at 0,0,0)?

I've imported a dxf file of a layout of a house and extruded upwards. Now I want to import another dxf to lay down the ceiling and the 1st floor. After that, the 1st floor layout and so on.

Do I need to make a new work plane, and if so, how does one go about that?

Tom
Back to top
ttrw  
#2 Posted : Thursday, May 22, 2008 1:07:07 PM(UTC)
ttrw

Rank: Senior Member

Joined: 4/1/2007(UTC)
Posts: 1,583

Was thanked: 2 time(s) in 2 post(s)
Either you are all really hard at work, or no one uses ViaCAD! :eek:

So? Any takers??

:)
Back to top
Tim Olson  
#3 Posted : Thursday, May 22, 2008 1:25:46 PM(UTC)
Tim Olson

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 5,450
United States

Was thanked: 508 time(s) in 354 post(s)
ttrw wrote:
This is probably one which is totally obvious, but how is it possible to reposition the axis (which is currently set at 0,0,0)?

I've imported a dxf file of a layout of a house and extruded upwards. Now I want to import another dxf to lay down the ceiling and the 1st floor. After that, the 1st floor layout and so on.

Do I need to make a new work plane, and if so, how does one go about that?

Tom


Hi Tom,

The global coordinate system is fixed. You can reposition the work plane but that only impacts plane dependent geometry when it gets created. Would be interesting to have a transform or import into workplane.

Importing DXF files put everything into new layers. So I think you will need to import, isolate layer, then move the data to the position you need.


Tim
Tim Olson
IMSI Design/Encore
Back to top
ttrw  
#4 Posted : Thursday, May 22, 2008 1:37:37 PM(UTC)
ttrw

Rank: Senior Member

Joined: 4/1/2007(UTC)
Posts: 1,583

Was thanked: 2 time(s) in 2 post(s)
Tim Olson wrote:
Would be interesting to have a transform or import into workplane.


Yes. It would be a very useful addition especially as ViaCAD seems to have new architectural tools. What I was doing was recreating a house for a 3D VR project, with each floor having a different layout drawn in Macdraft and QCad and then imported into ViaCAD via the normal dxf route.

I can get round the problem, but it is awkward, as I would have to use the entire outline of the building, extruded to its highest point, then would have to cut each floor out individually- if you see what I mean?

In the meantime, what screen capture software did you use in that example you uploaded before (sorry for the OT).

Tom
Back to top
Tim Olson  
#5 Posted : Friday, May 23, 2008 12:00:40 AM(UTC)
Tim Olson

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 5,450
United States

Was thanked: 508 time(s) in 354 post(s)
>>In the meantime, what screen capture software did you use in that >>example you uploaded before (sorry for the OT).

Tom

I use Snapz Pro X and love it.

Tim
Tim Olson
IMSI Design/Encore
Back to top
jol  
#6 Posted : Friday, May 23, 2008 6:56:19 AM(UTC)
jol

Rank: Senior Member

Joined: 2/26/2007(UTC)
Posts: 2,156

Was thanked: 1 time(s) in 1 post(s)
or .. in Shark you can record quicktime movies within
Back to top
ttrw  
#7 Posted : Saturday, May 24, 2008 1:23:51 AM(UTC)
ttrw

Rank: Senior Member

Joined: 4/1/2007(UTC)
Posts: 1,583

Was thanked: 2 time(s) in 2 post(s)
But I don't have Shark! (yet).

:)

edit; It's irrelevant anyway because it seems that anything larger than 1 to 2mb's I can't upload to this forum anyway :(

It's probably got something to do with being in the United Kingdom and Punch being in the United States!

Tom
Back to top
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET 2.1.2 | YAF.NET © 2003-2025, Yet Another Forum.NET