Punch! CAD
»
ViaCAD & Shark
»
Tips and Tutorials
»
Mate, Align, and Insert Video (#1147)
Rank: Senior Member
Joined: 2/2/2007(UTC)
Posts: 5,447
Was thanked: 499 time(s) in 353 post(s)
QT video showing the assembly tools created by Nick Johnson our UK Shark distributor.
http://www.cadsoftsolutions.co....s/connect_mate_align.mov Tim
Tim Olson
Rank: Junior Member
Joined: 11/3/2007(UTC)
Thanks for the good work!
Rank: Senior Member
Joined: 4/1/2007(UTC)
Was thanked: 2 time(s) in 2 post(s)
Tim, Nick, (Steve?)
I've been trying to get the following two parts to mate together- but have had no luck so far. Okay, it needs a pin or something to hold it there, but I was trying for a basic concentric mate, but can't get Shark to do anything (apart from give me an error, about surfaces needing to be planar).
Can either of you help, or someone else want to chime in?
Fwiw, I can get one basic mate to work- the face to face mate- but that's all.
The two bushes may not be the same diameter (where's the tape measure? - ah yes... they're not. Does that matter? :confused:)
Tom
File Attachment(s):
Pulley and Mount assembly.slt
(275kb) downloaded 5 time(s). ttrw attached the following image(s):
mating difficulty.jpg
(11kb) downloaded 6 time(s). You cannot view/download attachments. Try to login or register.
Rank: Senior Member
Joined: 5/15/2008(UTC)
Thanks: 16 times
LOL! The subject alone made me think of the earlier BB spam comments.... hehehehe
Rank: Senior Member
Joined: 6/18/2008(UTC)
Was thanked: 1 time(s) in 1 post(s)
Originally Posted by: ttrw apart from give me an error, about surfaces needing to be planar
Hi Tom,
Are you trying to align as shown in the pic?
If yes, then one way to do that:- use "Align Faces" and click the inside face of each hole, then use "mate faces" to align the 2 mating faces.
- Steve
Steve.M attached the following image(s):
2009-05-19_000512.jpg
(28kb) downloaded 5 time(s). You cannot view/download attachments. Try to login or register.
Rank: Senior Member
Joined: 4/1/2007(UTC)
Was thanked: 2 time(s) in 2 post(s)
Steve, a Gent, like usual! :D
Rank: Senior Member
Joined: 4/1/2007(UTC)
Was thanked: 2 time(s) in 2 post(s)
Steve, dunno if you can see this, but here's what I was trying to do (minus pin).
It's taken me a whole day to do what I would normally do in an hour (if I were using Solidworks). But I'm learning- fast.
I'll mention this here, but I'm going to bring the same thead up in the beta section;
Tim, It's somewhat annoying that when a part is imported into an assembly, it comes in as a "part_362062..etc" part rather than the
actual name of that part- which is highly frustrating because I just have to rename the part again. This has got to be a bug, because it is named properly in the layer manager! (see attached pix) :mad:
File Attachment(s):
photo-1.png
(517kb) downloaded 5 time(s). ttrw attached the following image(s):
Picture 6.png
(38kb) downloaded 5 time(s). Picture 7.png
(24kb) downloaded 5 time(s). You cannot view/download attachments. Try to login or register.
Punch! CAD
»
ViaCAD & Shark
»
Tips and Tutorials
»
Mate, Align, and Insert Video (#1147)
Forum Jump
Punch! CAD
ViaCAD & Shark
- News and Announcements
- General
- 2D Drafting
- Surface Modeling
- Solid Modeling
- Subdivision Modeling
- Rendering & Display
- Import/Export
- Tips and Tutorials
- Suggestions
- Gallery
- PowerPack
- Punch Lounge
You cannot post new topics in this forum.
cannot reply to topics in this forum.
cannot delete your posts in this forum.
cannot edit your posts in this forum.
cannot create polls in this forum.
cannot vote in polls in this forum.
