logo
NOTICE:  This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the Lost Password feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Maybe this related to my crashes? - Cannot render feature
Options
Go to last post Go to first unread
Previous Topic Next Topic
jbskaggs  
#1 Posted : Sunday, February 7, 2016 2:26:22 AM(UTC)
jbskaggs

Rank: Guest

Joined: 2/4/2016(UTC)
Posts: 116

Thanks: 22 times
Was thanked: 8 time(s) in 8 post(s)
If I save a model with several objects as a symbol. Then I load those into a new model via Concept Explorer/ symbols it loads fine.

but I cannot move scale or rotate the symbol. it gives me a Cannot render this feature error. They way I get the error to stop is to un group the objects- then one at a time select them with shift-click only then can I use them normally. Otherwise selection by box or ctrl a gives the same error cannot render feature.

attached is the model I saved to symbols.

Edited by user Sunday, February 7, 2016 2:27:52 AM(UTC)  | Reason: Not specified

File Attachment(s):
mariko long rail.vcp (684kb) downloaded 7 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
L. Banasky  
#2 Posted : Sunday, February 7, 2016 4:08:28 AM(UTC)
L. Banasky

Rank: Senior Member

Joined: 2/16/2007(UTC)
Posts: 602

Thanks: 156 times
Was thanked: 150 time(s) in 103 post(s)
I think the problem is with 2 small circles.
Do a 'Hide all objects', then 'Show all curves', Select all'
and Delete the curves.
Do a 'Show all objects' and you should be good to go.
Larry
File Attachment(s):
mariko long rail-1.vcp (677kb) downloaded 7 time(s).
L. Banasky attached the following image(s):
Rail.jpg (23kb) downloaded 6 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
thanks 1 user thanked L. Banasky for this useful post.
jbskaggs on 2/7/2016(UTC)
jbskaggs  
#3 Posted : Sunday, February 7, 2016 9:11:59 AM(UTC)
jbskaggs

Rank: Guest

Joined: 2/4/2016(UTC)
Posts: 116

Thanks: 22 times
Was thanked: 8 time(s) in 8 post(s)
So when you use a line or circle to make a hole etc-- it does not automatically delete those lines when the push / pull is done?

BTW thanks for the help!
Back to top
jbskaggs  
#4 Posted : Sunday, February 7, 2016 9:18:13 AM(UTC)
jbskaggs

Rank: Guest

Joined: 2/4/2016(UTC)
Posts: 116

Thanks: 22 times
Was thanked: 8 time(s) in 8 post(s)
I just tested your suggestion and worked like a charm!


Originally Posted by: L. Banasky Go to Quoted Post
I think the problem is with 2 small circles.
Do a 'Hide all objects', then 'Show all curves', Select all'
and Delete the curves.
Do a 'Show all objects' and you should be good to go.
Larry
Back to top
rokoko  
#5 Posted : Sunday, February 7, 2016 3:05:44 PM(UTC)
rokoko

Rank: Senior Member

Joined: 9/28/2013(UTC)
Posts: 345

Thanks: 4 times
Was thanked: 57 time(s) in 45 post(s)
Originally Posted by: jbskaggs Go to Quoted Post
So when you use a line or circle to make a hole etc-- it does not automatically delete those lines when the push / pull is done?

no, the lines/curves stay in the drawing, they are "sketches". later you can change parameters on that sketch and your extrusion/push-pull etc will follow (associativity). in the picture i drew a circle on top of a block and did a push-pull. when selecting the circle i'm able to change diameter of the protrusion. i also can move the sketch - try it!
if you don't want to see the sketches in your drawing, then hide them or move them to a hidden layer.

rokoko attached the following image(s):
ppull.png (50kb) downloaded 5 time(s).

You cannot view/download attachments. Try to login or register.
viacad pro 10 powerpackpro, viacad pro 9 german, mac
Back to top
jbskaggs  
#6 Posted : Sunday, February 7, 2016 3:09:36 PM(UTC)
jbskaggs

Rank: Guest

Joined: 2/4/2016(UTC)
Posts: 116

Thanks: 22 times
Was thanked: 8 time(s) in 8 post(s)
Originally Posted by: rokoko Go to Quoted Post
Originally Posted by: jbskaggs Go to Quoted Post
So when you use a line or circle to make a hole etc-- it does not automatically delete those lines when the push / pull is done?

no, the lines/curves stay in the drawing, they are "sketches". later you can change parameters on that sketch and your extrusion/push-pull etc will follow (associativity). in the picture i drew a circle on top of a block and did a push-pull. when selecting the circle i'm able to change diameter of the protrusion. i also can move the sketch - try it!
if you don't want to see the sketches in your drawing, then hide them or move them to a hidden layer.



but then don't these circles then cause the error listed above? Im sorry but this is confusing to me.
Back to top
rokoko  
#7 Posted : Sunday, February 7, 2016 3:23:47 PM(UTC)
rokoko

Rank: Senior Member

Joined: 9/28/2013(UTC)
Posts: 345

Thanks: 4 times
Was thanked: 57 time(s) in 45 post(s)
ok, for a symbol the sketches can cause trouble. you can delete the sketches in a finished model before doing a save as symbol.
viacad pro 10 powerpackpro, viacad pro 9 german, mac
Back to top
Users browsing this topic
Guest (3)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET 2.1.2 | YAF.NET © 2003-2024, Yet Another Forum.NET