logo
NOTICE:  This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the Lost Password feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Converting text to lines
Options
Go to last post Go to first unread
Previous Topic Next Topic
Dyn_Metalworks  
#1 Posted : Tuesday, November 23, 2021 9:42:53 AM(UTC)
Dyn_Metalworks

Rank: Guest

Joined: 11/30/2015(UTC)
Posts: 49
United States

Thanks: 1 times
Was thanked: 2 time(s) in 2 post(s)
When I convert this text to lines, I end up with jagged lines. How do I smooth this before cutting on the cnc?
Dyn_Metalworks attached the following image(s):
Capture.JPG (31kb) downloaded 2 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
jdi000  
#2 Posted : Tuesday, November 23, 2021 9:59:33 AM(UTC)
jdi000

Rank: Administration

Joined: 7/29/2007(UTC)
Posts: 1,862
United States

Thanks: 1 times
Was thanked: 87 time(s) in 81 post(s)
Hello

Try using the Arcs from curve tool in the arc toolbar
So all the entities become arcs for smooth cnc cutting.

Regards
Jason

Edited by user Tuesday, November 23, 2021 10:02:02 AM(UTC)  | Reason: Not specified

Windows 11, 10
Back to top
thanks 2 users thanked jdi000 for this useful post.
L. Banasky on 11/23/2021(UTC), GARLIC on 11/24/2021(UTC)
MPSchmied  
#3 Posted : Wednesday, November 24, 2021 12:11:42 PM(UTC)
MPSchmied

Rank: Guest

Joined: 4/9/2017(UTC)
Posts: 516
Man
Germany

Thanks: 280 times
Was thanked: 143 time(s) in 109 post(s)
You made this wrong.
You need for good results:
http://www.cadkas.com/downgercad4.php
http://www.cadkas.com/dxf-splines-in-arcs.php

A very old Corel Draw Version i used 1999 made also good splines from Text.... But in SharkViaCAD i cant find such a Tool.

Originally Posted by: jdi000 Go to Quoted Post

Try using the Arcs from curve tool in the arc toolbar
So all the entities become arcs for smooth cnc cutting.
Jason

What when he have no curve already?

Edited by user Wednesday, November 24, 2021 12:12:58 PM(UTC)  | Reason: Not specified

OS: Windows 10 | CPU: AMD Ryzen 7 2700 | RAM: 32 GB | Graphic: AMD Radeon RX Vega 56 | Shark FX 9 Build 1162 | Unit: mm
Back to top
Dyn_Metalworks  
#4 Posted : Thursday, November 25, 2021 7:16:42 AM(UTC)
Dyn_Metalworks

Rank: Guest

Joined: 11/30/2015(UTC)
Posts: 49
United States

Thanks: 1 times
Was thanked: 2 time(s) in 2 post(s)
Originally Posted by: jdi000 Go to Quoted Post
Hello

Try using the Arcs from curve tool in the arc toolbar
So all the entities become arcs for smooth cnc cutting.

Regards
Jason



I was able to find the Simplify Curves tool which didn't work, but not the Arcs from curves. Could you tell me where it's located? Thanks
Back to top
MPSchmied  
#5 Posted : Saturday, November 27, 2021 8:53:27 PM(UTC)
MPSchmied

Rank: Guest

Joined: 4/9/2017(UTC)
Posts: 516
Man
Germany

Thanks: 280 times
Was thanked: 143 time(s) in 109 post(s)
Originally Posted by: Dyn_Metalworks Go to Quoted Post

I was able to find the Simplify Curves tool which didn't work, but not the Arcs from curves. Could you tell me where it's located? Thanks

Its in the Arcs-Section of the Toolbar.
MPSchmied attached the following image(s):
Zwischenablage01.png (21kb) downloaded 2 time(s).

You cannot view/download attachments. Try to login or register.
OS: Windows 10 | CPU: AMD Ryzen 7 2700 | RAM: 32 GB | Graphic: AMD Radeon RX Vega 56 | Shark FX 9 Build 1162 | Unit: mm
Back to top
thanks 2 users thanked MPSchmied for this useful post.
GARLIC on 11/28/2021(UTC), damhave on 11/29/2021(UTC)
Dyn_Metalworks  
#6 Posted : Monday, November 29, 2021 8:28:09 AM(UTC)
Dyn_Metalworks

Rank: Guest

Joined: 11/30/2015(UTC)
Posts: 49
United States

Thanks: 1 times
Was thanked: 2 time(s) in 2 post(s)
Originally Posted by: MPSchmied Go to Quoted Post
Originally Posted by: Dyn_Metalworks Go to Quoted Post

I was able to find the Simplify Curves tool which didn't work, but not the Arcs from curves. Could you tell me where it's located? Thanks

Its in the Arcs-Section of the Toolbar.


Thank you for the reply, I'm using ViaCAD so it appears I don't have that tool.
Back to top
murray  
#7 Posted : Monday, November 29, 2021 10:03:24 PM(UTC)
murray

Rank: Senior Member

Joined: 9/24/2014(UTC)
Posts: 373
Australia

Thanks: 8 times
Was thanked: 104 time(s) in 85 post(s)
Do you set the text resolution to super fine before you convert to lines?
Back to top
Dyn_Metalworks  
#8 Posted : Tuesday, November 30, 2021 5:26:17 PM(UTC)
Dyn_Metalworks

Rank: Guest

Joined: 11/30/2015(UTC)
Posts: 49
United States

Thanks: 1 times
Was thanked: 2 time(s) in 2 post(s)
Originally Posted by: murray Go to Quoted Post
Do you set the text resolution to super fine before you convert to lines?


Yes, I confirmed it was set to super fine.
Back to top
MPSchmied  
#9 Posted : Wednesday, December 1, 2021 1:55:32 AM(UTC)
MPSchmied

Rank: Guest

Joined: 4/9/2017(UTC)
Posts: 516
Man
Germany

Thanks: 280 times
Was thanked: 143 time(s) in 109 post(s)
Originally Posted by: Dyn_Metalworks Go to Quoted Post
Yes, I confirmed it was set to super fine.
Did you use the right mouse button on the Text for context-menu Resolution. The Text resolution will be always down, also when your global setup is "super fine". Convertet you the Text to curves or Lines? Use just the CAD-Kas Software is my suggestion.

OS: Windows 10 | CPU: AMD Ryzen 7 2700 | RAM: 32 GB | Graphic: AMD Radeon RX Vega 56 | Shark FX 9 Build 1162 | Unit: mm
Back to top
murray  
#10 Posted : Wednesday, December 1, 2021 5:46:47 AM(UTC)
murray

Rank: Senior Member

Joined: 9/24/2014(UTC)
Posts: 373
Australia

Thanks: 8 times
Was thanked: 104 time(s) in 85 post(s)
Speculating, don't know if this'll make a difference, but is there a difference if you scale the text up with the resolution set super fine, convert to lines, then scale back down again?
Back to top
thanks 1 user thanked murray for this useful post.
MPSchmied on 12/1/2021(UTC)
Dyn_Metalworks  
#11 Posted : Wednesday, December 1, 2021 6:20:08 AM(UTC)
Dyn_Metalworks

Rank: Guest

Joined: 11/30/2015(UTC)
Posts: 49
United States

Thanks: 1 times
Was thanked: 2 time(s) in 2 post(s)
I ended up using inkscape for the text then importing the dxf into VC to finish the part. I appreciate everyone's replies.
Back to top
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET 2.1.2 | YAF.NET © 2003-2024, Yet Another Forum.NET