logo
NOTICE:  This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the Lost Password feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
2 Pages12>
splines - twist - surfaces (#3983)
Options
Go to last post Go to first unread
Previous Topic Next Topic
la mouche  
#1 Posted : Tuesday, September 27, 2011 6:02:57 AM(UTC)
la mouche

Rank: Senior Member

Joined: 3/14/2007(UTC)
Posts: 757
Hello,

What is the best method to create a solid or surface with this splines, please?

after 2 days of work .... I still can not

Thanks

http://screencast.com/t/l7a3IIP4GqZu

Antoine
Back to top
rockyroad_us  
#2 Posted : Tuesday, September 27, 2011 7:15:25 AM(UTC)
rockyroad_us

Rank: Senior Member

Joined: 9/12/2009(UTC)
Posts: 608
Man
United States
Location: In my place

Was thanked: 59 time(s) in 51 post(s)
I think you need the same number of points.
FX 7-FXPro14-1650
MacPro 11.7.4
2x2.8GHz Quad Xeon 32GB
NVIDIA 4 K5000 4GB
Work
Back to top
WWW
jlm  
#3 Posted : Tuesday, September 27, 2011 10:24:46 AM(UTC)
jlm

Rank: Senior Member

Joined: 2/18/2007(UTC)
Posts: 1,252
Man
France
Location: Paris & Frankfurt

Thanks: 217 times
Was thanked: 164 time(s) in 101 post(s)
Originally Posted by: la mouche Go to Quoted Post
Hello,

What is the best method to create a solid or surface with this splines, please?


Hi Antoine,

Did you try "change object type" for the splines ?

I think "Control points splines" are better than "interpolate" to build surfaces.

Maybe...

But Rockyroad is right, when the number of points is different, it's never perfect.

On this type of construction, I would build new splines with less points on top, and add a few guides in the other direction...


Good luck,

JL
Back to top
WWW
lgrijalva  
#4 Posted : Tuesday, September 27, 2011 11:57:27 AM(UTC)
lgrijalva

Rank: Senior Member

Joined: 6/15/2007(UTC)
Posts: 398

Thanks: 1 times
Was thanked: 4 time(s) in 4 post(s)
Originally Posted by: rockyroad_us Go to Quoted Post
I think you need the same number of points.


Several times i had been tried working with splines with the same, (i assume for Antoine's screen cast that he offset the first one made with lets say 10 control points and ended with offsets with a huge amount of points).

My question, if you have an original one with 8 points, why the offset doesn't "offset" with the same amount of them?, so it is hard to draw and control this patterns of splines with the same point count unless you draw one by one, that IMO should be done by simple offsetting the original and then modify the resulted ones if you need it, (most of the case you nee to modify on or two to get the desired pattern.)

Luis G.
Luis G
Industrial Designer
MacOSX Ventura 13.6.4
User since Concepts Unlimited
SharkCad 14
www.miditec.com.mx
www.diferro.com
Back to top
WWW
la mouche  
#5 Posted : Wednesday, September 28, 2011 1:59:45 AM(UTC)
la mouche

Rank: Senior Member

Joined: 3/14/2007(UTC)
Posts: 757
hello and thanks for your interrest :)

Quote:
My question, if you have an original one with 8 points, why the offset doesn't "offset" with the same amount of them?, so it is hard to draw and control this patterns of splines with the same point count unless you draw one by one, that IMO should be done by simple offsetting the original and then modify the resulted ones if you need it, (most of the case you nee to modify on or two to get the desired pattern.)


[COLOR="red"]yes it is a serious limitation[/COLOR]

----------------------------------


Well ...

I have a lot of points, because I had to redraw my spline, spline with another spline reference.
I think this is a normal process.

The problem: Shark does not reach the last point (end) of the spline with the first point (start) ...

[COLOR="Lime"]"TIPS" created starting with the spline on the starting point of the spline reference[/COLOR]

http://screencast.com/t/N2EYp43yJ8HL

1 - why can not Shark snap the first point of the spline with the last?

----------------------------------

So, I created a little spline to close the spline at all.
Then: I linked the two splines together with the [COLOR="Red"]"join curve"[/COLOR]
result: lots and lots of point.

2 - Tim? please! Why Shark adds a lot of points [COLOR="red"]with this tool?[/COLOR]

----------------------------------

Thanks.
Back to top
la mouche  
#6 Posted : Wednesday, September 28, 2011 2:17:20 AM(UTC)
la mouche

Rank: Senior Member

Joined: 3/14/2007(UTC)
Posts: 757
an unsatisfactory solution ... to draw the surface

http://screencast.com/t/m3cUprRZEo

Antoine
Back to top
jol  
#7 Posted : Wednesday, September 28, 2011 4:09:11 AM(UTC)
jol

Rank: Senior Member

Joined: 2/26/2007(UTC)
Posts: 2,156

Was thanked: 1 time(s) in 1 post(s)
Some good real-world questions in this tread Tim

If you really want to make these tools easier to use - it's these workflow bottlenecks we all encounter that you need to address

I'm sure these problems don't require massive amounts of time to solve - but removing these stumbling blocks would make life so much easier

such as

a tool to give you an offset with the same number of points (with I guess a deviation from true offset feedback)

such as

a profile manager that gives you real and useful information of where the gaps / overlaps are .... actually

such as

snapping the end of a spline to the start - still no explanation of this in 10 years

such as

modify slope tool always needing to be flipped - when tangenting a spline into a surface or solid. Can you at least add the option key to flip this over - and save you from always swapping tools again ?

such as ...

i'm sure there are loads more
Back to top
la mouche  
#8 Posted : Wednesday, September 28, 2011 4:54:55 AM(UTC)
la mouche

Rank: Senior Member

Joined: 3/14/2007(UTC)
Posts: 757
Jol, thank you for your support.

Antoine
Back to top
ZeroLengthCurve  
#9 Posted : Wednesday, September 28, 2011 12:42:36 PM(UTC)
ZeroLengthCurve

Rank: Senior Member

Joined: 5/15/2008(UTC)
Posts: 993

Thanks: 23 times
Was thanked: 43 time(s) in 27 post(s)
Antoine,


Did your curves come from an external tool, or did you originate them in Shark?

Story of my problem with my externally-originated curves.

I experience something similar when I import my models from Delftship and Free!ship. At first, I wasn't sure of the problem's source. Could it be DS/FS? Could it be ViaCAD? In my case, I think it is my hand and eye, and my own improper use of the curvature plot facilities in DS and FS. DS has an auto-fairing feature, which is neat. FS does not have it. I needed to clean up some linework and was forced to export my model to DS (at some emotional expense since sending the files between the two apps involves some inexplicable reordering of layers, and there is no user-definable layer field which can be used to numerically force a custom sort).

But, when I made much use of the curvature plot tool, I found I maybe 20 curves which had curvature plots going off into infinity. Importing such lines into VCP as DXF 3D polylines had some impact, but out of over 700+, only 10 (near each other) caused me great grief. That grief was that I could not properly do 1-rail sweeps along those curves, and had to break up those curves and then do the sweeps. In some cases, i had to rebuild the curves in VCP. Where possible, I could flip some thicknesses but was uncomfortable with that as a way to get the surface to work.
Back to top
la mouche  
#10 Posted : Thursday, September 29, 2011 8:55:12 AM(UTC)
la mouche

Rank: Senior Member

Joined: 3/14/2007(UTC)
Posts: 757
splines from SharkFX.
Back to top
Tim Olson  
#11 Posted : Friday, September 30, 2011 3:10:18 PM(UTC)
Tim Olson

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 5,447
United States

Was thanked: 502 time(s) in 353 post(s)
>>What is the best method to create a solid or surface with this splines, please?

Did you try changing any of the Skin attributes?
--minimize twist
--arc length v parameterization
--arc length u parameterization
--alignment

The number of control points should not make a difference. It would be shape complexity and parameterization between the curves that would drive twisting.

Some images from the guys at Dassault/Spatial regarding this options.

http://doc.spatial.com/index.ph...Surface_Parameterization

http://doc.spatial.com/index.ph...ofting_Options/Alignment


Tim
Tim Olson
IMSI Design/Encore
Back to top
la mouche  
#12 Posted : Sunday, October 2, 2011 2:38:09 AM(UTC)
la mouche

Rank: Senior Member

Joined: 3/14/2007(UTC)
Posts: 757
hello Tim,

thank you for your answer.

there is still a question:

Quote:
1 - why can not Shark snap the first point of the spline with the last?


Thanks.

Antoine
Back to top
jol  
#13 Posted : Sunday, October 2, 2011 4:10:06 AM(UTC)
jol

Rank: Senior Member

Joined: 2/26/2007(UTC)
Posts: 2,156

Was thanked: 1 time(s) in 1 post(s)
Antoine, if Tim answers / fixes this, I will eat all my roof tiles !
Back to top
blowlamp  
#14 Posted : Sunday, October 2, 2011 4:28:13 AM(UTC)
blowlamp

Rank: Senior Member

Joined: 6/28/2008(UTC)
Posts: 648
Can someone explain what they mean about this, because I thought they already did snap first to last - unless you mean that the ends aren't made tangent if you subsequently try to join them by editing the line?

Hope the above makes sense :D

Martin.


***Edit: OK My bad. I now see that they don't snap (for some reason I thought it looked like they did?!?). So Tim, why don't they snap (hehehe)?
Back to top
blowlamp  
#15 Posted : Sunday, October 2, 2011 5:06:52 AM(UTC)
blowlamp

Rank: Senior Member

Joined: 6/28/2008(UTC)
Posts: 648
The work-around is to drop a Point object on one end or the other and use that as your snap location for the opposite end of the curve.


Martin.
Back to top
jol  
#16 Posted : Sunday, October 2, 2011 7:17:06 AM(UTC)
jol

Rank: Senior Member

Joined: 2/26/2007(UTC)
Posts: 2,156

Was thanked: 1 time(s) in 1 post(s)
Thanks Martin - appreciate the input, but we know the workaround ... that wasn't the request

The request is to fix the problem - so that people who are learning don't need to discover the workaround

Fixing stuff like this vastly improves workflow - and needs sorting first before the introduction of new tools - bringing their own workflow issues

There needs to be a limit to how long questions like this can be ignored - I count 10 years on this one

That's how I know my roof tiles are quite safe !
Back to top
la mouche  
#17 Posted : Sunday, October 2, 2011 10:17:21 AM(UTC)
la mouche

Rank: Senior Member

Joined: 3/14/2007(UTC)
Posts: 757
mmhhh, watch.. more... my demo please .....

when the spline is only the latter is connected properly with the first.

This is when I use a spline reference (below) that it does not work


Antoine
Back to top
Tim Olson  
#18 Posted : Sunday, October 2, 2011 4:42:31 PM(UTC)
Tim Olson

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 5,447
United States

Was thanked: 502 time(s) in 353 post(s)
>>My question, if you have an original one with 8 points, why the offset >>doesn't "offset" with the same amount of them?

Dassault/ACIS uses a precision algorithm for offsetting where everywhere between the points it must meet the definition of the offset (not just at the points). For example, offsetting an ellipse is not another ellipse.


Tim
Tim Olson
IMSI Design/Encore
Back to top
blowlamp  
#19 Posted : Sunday, October 2, 2011 5:28:10 PM(UTC)
blowlamp

Rank: Senior Member

Joined: 6/28/2008(UTC)
Posts: 648
I'm not arguing against the idea, but what other software does allow the ends to be edited to snap together?

None of the other drawing programs that I have seem to let me do this, such as Solid Edge 2D Drafting, Dolphin CAD and Inkscape etc - although I'm no expert in any of them, so I could be missing how to do it.

Martin.
Back to top
Tem  
#20 Posted : Sunday, October 2, 2011 9:15:41 PM(UTC)
Tem

Rank: Senior Member

Joined: 2/21/2007(UTC)
Posts: 386
Man
United States

Thanks: 6 times
Was thanked: 3 time(s) in 3 post(s)
Maybe there is a way to loft through all of the contours and close the loft?
Possibly do each side/depth, then boolean/trim and round/fillet between?
Kinda wonky, but maybe it is a possible approach? I know that I had tried a similar form years ago with an older version of Rhino, but found that surface point editing was the quickest approach.
Good luck!
Back to top
WWW
Users browsing this topic
Guest (3)
2 Pages12>
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET 2.1.2 | YAF.NET © 2003-2024, Yet Another Forum.NET