logo
NOTICE:  This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the Lost Password feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Join Surfaces looses continuity ? (#5129)
Options
Go to last post Go to first unread
Previous Topic Next Topic
kevjon  
#1 Posted : Saturday, May 31, 2014 11:15:09 PM(UTC)
kevjon

Rank: Junior Member

Joined: 9/30/2009(UTC)
Posts: 29

Was thanked: 1 time(s) in 1 post(s)
Hi

I'm using Viacad 8 on Win7.

I have used the "loft surface tool" between two adjacent surfaces to get the whole blended together (purple section).

When I apply zebra analysis it looks fine but when I join the surfaces it looses continuity as show by the skewed zebra.

Is it a bug or am I doing something wrong ?
kevjon attached the following image(s):
4 Join Surface.jpg (69kb) downloaded 8 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
Tim Olson  
#2 Posted : Sunday, June 1, 2014 11:56:27 PM(UTC)
Tim Olson

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 5,447
United States

Was thanked: 502 time(s) in 353 post(s)
>> when I join the surfaces it looses continuity as show by the skewed zebra.

Does it do this if you turn off healing in the join command?

Join: Options: Maximum Heal Gap Size=0.0.

Also, be sure to crank up your display resolution, the zebra normals are calculated at the display facet density.

Tim
Tim Olson
IMSI Design/Encore
Back to top
kevjon  
#3 Posted : Monday, June 2, 2014 2:56:17 AM(UTC)
kevjon

Rank: Junior Member

Joined: 9/30/2009(UTC)
Posts: 29

Was thanked: 1 time(s) in 1 post(s)
Hi Tim

Thanks for a reply.

When I set heal gap to 0.0 and change the resolution of the joined surfaces to super fine I still get stepping in the zebra which indicates to me there are problems with my continuity.

When I export to obj and bring it into modo, it renders Ok though, although I can see very minor flaws there.

See attached image.
kevjon attached the following image(s):
5 Join Surface.JPG (87kb) downloaded 8 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
Tim Olson  
#4 Posted : Monday, June 2, 2014 9:00:03 AM(UTC)
Tim Olson

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 5,447
United States

Was thanked: 502 time(s) in 353 post(s)
Can you post or private email me the file? tim.olson at evo-soft.net

Thanks

Tim
Tim Olson
IMSI Design/Encore
Back to top
kevjon  
#5 Posted : Tuesday, June 3, 2014 1:53:28 AM(UTC)
kevjon

Rank: Junior Member

Joined: 9/30/2009(UTC)
Posts: 29

Was thanked: 1 time(s) in 1 post(s)
Ok, I've sent it off to you, let me know if you didn't receive it.
Back to top
kevjon  
#6 Posted : Wednesday, June 4, 2014 3:28:14 AM(UTC)
kevjon

Rank: Junior Member

Joined: 9/30/2009(UTC)
Posts: 29

Was thanked: 1 time(s) in 1 post(s)
Tim has responded via email. Great service !

His solution in this case was to Set both stitch gap and heal gap to 0.0 in the join surface command options which resulted in a prefect zebra after the join.
Back to top
Users browsing this topic
Guest (2)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET 2.1.2 | YAF.NET © 2003-2024, Yet Another Forum.NET