logo
NOTICE:  This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the Lost Password feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
sharp vertices join for join curve tool (#4306)
Options
Go to last post Go to first unread
Previous Topic Next Topic
lgrijalva  
#1 Posted : Friday, April 27, 2012 2:11:31 PM(UTC)
lgrijalva

Rank: Senior Member

Joined: 6/15/2007(UTC)
Posts: 398

Thanks: 1 times
Was thanked: 4 time(s) in 4 post(s)
es there anyway to join arc an lines into a curve whit sharp vertices?

when i try to do this with join curve, even with tolerance to zero, the vertices join to a continuous targeted line, i don't want this, i want to make a net service with sharp corners.

I tried poly lines but it generate too much points.
please see the attached pictures so i can explain better.

Luis G.

[ATTACH]4368[/ATTACH]

[ATTACH]4369[/ATTACH]
lgrijalva attached the following image(s):
sharp.png (59kb) downloaded 7 time(s).
ROUND.png (41kb) downloaded 7 time(s).

You cannot view/download attachments. Try to login or register.
Luis G
Industrial Designer
MacOSX Ventura 13.6.4
User since Concepts Unlimited
SharkCad 14
www.miditec.com.mx
www.diferro.com
Back to top
WWW
phil  
#2 Posted : Friday, April 27, 2012 5:28:26 PM(UTC)
phil

Rank: Senior Member

Joined: 9/5/2010(UTC)
Posts: 105
I had that problem too in one project last year:\
Back to top
jdi000  
#3 Posted : Friday, April 27, 2012 5:45:54 PM(UTC)
jdi000

Rank: Administration

Joined: 7/29/2007(UTC)
Posts: 1,862
United States

Thanks: 1 times
Was thanked: 87 time(s) in 81 post(s)
Did anyone try the corner trim tool?


Regards

Jason
Windows 11, 10
Back to top
phil  
#4 Posted : Friday, April 27, 2012 6:10:04 PM(UTC)
phil

Rank: Senior Member

Joined: 9/5/2010(UTC)
Posts: 105
When we use the corner trim, they'll "joint" it but they're multiple pieces. We basically use this tool to join it into one piece. (In my case a post-process was to make a fancy surface and the particular surface tool didn't like too many lines/pieces all over and doesn't like a grouped line:\)
Back to top
jol  
#5 Posted : Saturday, April 28, 2012 1:27:38 AM(UTC)
jol

Rank: Senior Member

Joined: 2/26/2007(UTC)
Posts: 2,156

Was thanked: 1 time(s) in 1 post(s)
Sounds to me like you're looking for something like a polyline - which I'm not sure is fully supported in VC / Shark.

Silly question ... can you just group your lines instead ?
Back to top
blowlamp  
#6 Posted : Saturday, April 28, 2012 2:08:40 AM(UTC)
blowlamp

Rank: Senior Member

Joined: 6/28/2008(UTC)
Posts: 648
I've had problem here too.

Some tools (like Rail Revolve Surface) only seem to work with a single curve, so if you have a shape composed of lines and arcs etc, then they need to be joined first.

The upshot is that the shape changes and therefore any surface or solid thus created is different from that intented.


Martin.
Back to top
jdi000  
#7 Posted : Saturday, April 28, 2012 8:51:45 AM(UTC)
jdi000

Rank: Administration

Joined: 7/29/2007(UTC)
Posts: 1,862
United States

Thanks: 1 times
Was thanked: 87 time(s) in 81 post(s)
It would be nice to have something that can join connected curves but do not change the curve type or alter shape. More of a composite curve that can be joined as a continuous entity that can be exploded back to original curve types vs converting to a multi segemented polyline or changing to unwanted curve types





Regards

Jason
Windows 11, 10
Back to top
lgrijalva  
#8 Posted : Saturday, April 28, 2012 6:17:13 PM(UTC)
lgrijalva

Rank: Senior Member

Joined: 6/15/2007(UTC)
Posts: 398

Thanks: 1 times
Was thanked: 4 time(s) in 4 post(s)
Originally Posted by: jol Go to Quoted Post
Sounds to me like you're looking for something like a polyline - which I'm not sure is fully supported in VC / Shark.

Silly question ... can you just group your lines instead ?


Shark/Viacad handle polylines in different way as other cad/3d software due that loose original geometry from the curve and generates to many points. look at the pics

Grouped lines work for some surfaces creation but not, for example, for net surface creation.

[ATTACH]4372[/ATTACH]
[ATTACH]4374[/ATTACH]
lgrijalva attached the following image(s):
rhinocurve.png (190kb) downloaded 7 time(s).
Sharkcurve.png (212kb) downloaded 7 time(s).

You cannot view/download attachments. Try to login or register.
Luis G
Industrial Designer
MacOSX Ventura 13.6.4
User since Concepts Unlimited
SharkCad 14
www.miditec.com.mx
www.diferro.com
Back to top
WWW
lgrijalva  
#9 Posted : Saturday, April 28, 2012 6:33:14 PM(UTC)
lgrijalva

Rank: Senior Member

Joined: 6/15/2007(UTC)
Posts: 398

Thanks: 1 times
Was thanked: 4 time(s) in 4 post(s)
Originally Posted by: jdi000 Go to Quoted Post
It would be nice to have something that can join connected curves but do not change the curve type or alter shape. More of a composite curve that can be joined as a continuous entity that can be exploded back to original curve types vs converting to a multi segemented polyline or changing to unwanted curve types

Regards

Jason


This is what I am talking about, anyone else join to us? (without change your nature)

:)
Luis G
Industrial Designer
MacOSX Ventura 13.6.4
User since Concepts Unlimited
SharkCad 14
www.miditec.com.mx
www.diferro.com
Back to top
WWW
jol  
#10 Posted : Sunday, April 29, 2012 1:51:26 PM(UTC)
jol

Rank: Senior Member

Joined: 2/26/2007(UTC)
Posts: 2,156

Was thanked: 1 time(s) in 1 post(s)
The VC/Shark lines menu offers the option to draw "Multi Lines"

Perhaps like a polygon, these should be either "smart" or "single" entities

(... and a change object type could be added to make up "Multi Lines" from a collection of lines)
Back to top
zumer  
#11 Posted : Tuesday, May 1, 2012 8:58:30 AM(UTC)
zumer

Rank: Senior Member

Joined: 11/4/2007(UTC)
Posts: 515

Was thanked: 1 time(s) in 1 post(s)
If you want to join lines as a single entity, don't draw them connected. Trace over one of the lines, but shortened back from the intersection point, then join the shortened line to the original complementary. I captured some Jing to demonstrate: http://screencast.com/t/x5PIiJwLX6W. My first Jing! That is cool and I feel ridiculously pleased with myself...
Back to top
lgrijalva  
#12 Posted : Tuesday, May 1, 2012 1:03:12 PM(UTC)
lgrijalva

Rank: Senior Member

Joined: 6/15/2007(UTC)
Posts: 398

Thanks: 1 times
Was thanked: 4 time(s) in 4 post(s)
What I want (and I need) is the ability to connect several lines and arcs together, where the vertex join between a line and an arc (or other curve as the splines) stays as vertex's point, (just as same way that polylines or group of curves), instead force the tangent's continuity on curve.

Luis G.
Luis G
Industrial Designer
MacOSX Ventura 13.6.4
User since Concepts Unlimited
SharkCad 14
www.miditec.com.mx
www.diferro.com
Back to top
WWW
Tim Olson  
#13 Posted : Tuesday, May 1, 2012 3:00:04 PM(UTC)
Tim Olson

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 5,447
United States

Was thanked: 502 time(s) in 353 post(s)
Hello Luis

>>do this with join curve...the vertices join to a continuous targeted line,

The result of a Join is a single G2 continuous curve. That is why you get a bulge when you join those two curves. The only exception is when joining lines, it will make a polyline.


>>i want to make a net service with sharp corners.

The Net Surface also creates a single G2 continuous surface. ACIS will display an error if you try to Net curves that are not continuous.

You may want to explore the Skin Surface. You can use curves that are not continuous within a section. The Skin Surface tool will create multiple faces depending on the section continuity.

To create a skin section with more than one curve, you will need to group the section.

Regards




Tim
Tim Olson
IMSI Design/Encore
Back to top
Users browsing this topic
Guest (4)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET 2.1.2 | YAF.NET © 2003-2024, Yet Another Forum.NET