logo
NOTICE:  This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the Lost Password feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Editing not working model to sheet (#5081)
Options
Go to last post Go to first unread
Previous Topic Next Topic
workshopswarf  
#1 Posted : Tuesday, April 15, 2014 3:53:44 AM(UTC)
workshopswarf

Rank: Member

Joined: 6/22/2011(UTC)
Posts: 91
I have a 3D model and use M to S to produce a 2D drawing.
The M to S shows a lot of hidden detail, some I don't want to show so I can delete it. If I want to add some additional lines though I find some of the editing will not work, e.g trim.
Looking through other posts it looks like there are issues with M to S.
Is this a known issue or is there something I do?
Can it be converted into a standard 2D drawing to enable editing?

Now later in the day.
I am wondering if it is indeed possible to produce a decent drawing. Not using draw view allows me to use the modify tools OK but I cannot snap to hole centers now.
I have discovered a work around, if I need to dimension between two holes, I can draw another circle over the existing ones using 3 point circle, dimension to this then delete my new circles.
Am I missing something, there has to be a better way?
Back to top
workshopswarf  
#2 Posted : Wednesday, April 16, 2014 1:59:17 AM(UTC)
workshopswarf

Rank: Member

Joined: 6/22/2011(UTC)
Posts: 91
I am wondering if it is indeed possible to produce a decent drawing. Not using draw view allows me to use the modify tools OK but I cannot snap to hole centers now.
I have discovered a work around, if I need to dimension between two holes, I can draw another circle over the existing ones using 3 point circle, dimension to this then delete my new circles.
Am I missing something, there has to be a better way?
Back to top
jdi000  
#3 Posted : Wednesday, April 16, 2014 4:16:26 AM(UTC)
jdi000

Rank: Administration

Joined: 7/29/2007(UTC)
Posts: 1,862
United States

Thanks: 1 times
Was thanked: 87 time(s) in 81 post(s)
You can flatten the drawing to get a 2d drawing but you lose all association with 3d model and circles are polylines with no center points


In the model to sheet you can change the views to a render like flat and the hole center points will show so you can dimension then you can switch view back to polylines. also can use the explode edge tool on solids to get circles and arcs.


You can also get circles and arcs with the cut section tool to create a 2d of a 3d face still have to work around a little.

Regards

Jason
Windows 11, 10
Back to top
ZeroLengthCurve  
#4 Posted : Thursday, April 17, 2014 2:14:17 PM(UTC)
ZeroLengthCurve

Rank: Senior Member

Joined: 5/15/2008(UTC)
Posts: 989

Thanks: 19 times
Was thanked: 37 time(s) in 25 post(s)
This was a timely post. I had mistakenly thought that "Flatten Draw Views" would also send ALL objects to a single layer and reduce file size. After trying it, I discovered it does not do that. Then, after seeing your post, I realized I could just select all of what I want retained, then send it to one layer, and delete all the other stuff I don't want remaining, and then purge history and deleted items.
Back to top
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET 2.1.2 | YAF.NET © 2003-2024, Yet Another Forum.NET