logo
NOTICE:  This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the Lost Password feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Model-to-Sheet question (Diameter) (#3443)
Options
Go to last post Go to first unread
Previous Topic Next Topic
misterrogers  
#1 Posted : Sunday, October 24, 2010 9:42:20 PM(UTC)
misterrogers

Rank: Senior Member

Joined: 8/14/2009(UTC)
Posts: 444
I want the Diameter dimension tool to display the hole's depth too.

e.g. 8 x 25

Seems pretty simple. How can I automatically get it to display this without typing it in manually?

Thanks.
Back to top
misterrogers  
#2 Posted : Tuesday, November 2, 2010 11:39:32 AM(UTC)
misterrogers

Rank: Senior Member

Joined: 8/14/2009(UTC)
Posts: 444
Anybody? Seems like the diameter tool should be able to detect what the hole's depth is since it's taken directly off the 3d geometry.
Back to top
la mouche  
#3 Posted : Tuesday, November 2, 2010 4:33:44 PM(UTC)
la mouche

Rank: Senior Member

Joined: 3/14/2007(UTC)
Posts: 757
hello,

you can not.

Antoine
Back to top
misterrogers  
#4 Posted : Saturday, November 6, 2010 11:46:38 AM(UTC)
misterrogers

Rank: Senior Member

Joined: 8/14/2009(UTC)
Posts: 444
So everybody has to manually add the drilling depth?

It seems as though an extra field could fix that problem.. Adding a " x Depth " after the .
Back to top
zumer  
#5 Posted : Saturday, November 6, 2010 5:14:41 PM(UTC)
zumer

Rank: Senior Member

Joined: 11/4/2007(UTC)
Posts: 515

Was thanked: 1 time(s) in 1 post(s)
Everything with a diameter isn't a hole. If it isn't a sphere, cylinder, cone base, lathe, or end-on ellipsoid, is it a hole feature, a cutout or a boolean subtraction? Is it a specified depth, or a through-hole? What face is the hole depth specified from? If it's an angled hole, which point on the face is the depth specified from? There's more complexity in the exceptions than the instances.
Back to top
misterrogers  
#6 Posted : Sunday, November 7, 2010 1:45:16 PM(UTC)
misterrogers

Rank: Senior Member

Joined: 8/14/2009(UTC)
Posts: 444
Originally Posted by: zumer Go to Quoted Post
Everything with a diameter isn't a hole. If it isn't a sphere, cylinder, cone base, lathe, or end-on ellipsoid, is it a hole feature, a cutout or a boolean subtraction? Is it a specified depth, or a through-hole? What face is the hole depth specified from? If it's an angled hole, which point on the face is the depth specified from? There's more complexity in the exceptions than the instances.


Understood Zumer your right.. I was hoping for an easier way than going back to constantly check the model for depth. I've been spoiled by this modern world of instant-gratification. :)
Back to top
ZeroLengthCurve  
#7 Posted : Wednesday, November 10, 2010 10:47:12 AM(UTC)
ZeroLengthCurve

Rank: Senior Member

Joined: 5/15/2008(UTC)
Posts: 991

Thanks: 20 times
Was thanked: 42 time(s) in 26 post(s)
Can it be possible to have the app treat the hole as a solid to be filled and checked for CGs?

-- Fire some rays to check for "closeability"
-- Try to "fill" or solidify the "hole"
-- Assign a likely or relevant material
-- Draw noded or spline-like axes for the user to skew or realign
-- Run some permutations and present some to the user (number and quality limited by the CPU/RAM)
-- Collect user usage stats and report back to Tim for further refinement of tool
Back to top
mikeschn  
#8 Posted : Wednesday, December 1, 2010 7:08:20 PM(UTC)
mikeschn

Rank: Senior Member

Joined: 8/21/2007(UTC)
Posts: 284

Thanks: 5 times
Was thanked: 2 time(s) in 2 post(s)
Even the high end CAD packages don't give you the depth. You have to add it to the diameter dimension.

One way around that is to take a section thru the hole, and throw a depth dimension on it... Now it's associative! ;)

Mike...
ViaCAD Pro 12 on Windows; Viacad Pro 14 on Mac
Back to top
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET 2.1.2 | YAF.NET © 2003-2024, Yet Another Forum.NET