logo
NOTICE:  This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the Lost Password feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Can't split solids (#3152)
Options
Go to last post Go to first unread
Previous Topic Next Topic
chipmaker2  
#1 Posted : Sunday, May 23, 2010 2:52:50 PM(UTC)
chipmaker2

Rank: Senior Member

Joined: 5/24/2008(UTC)
Posts: 129

Was thanked: 1 time(s) in 1 post(s)
[FONT="Comic Sans MS"][COLOR="navy"][/COLOR]]I can't seem to split a solid with a plane & I can't do it with project curve to surface/solid. The outline of where the split should be shows up after the operation but no split. See attached. I've shut down and restarted but same results.
Chuck[/FONT]
chipmaker2 attached the following image(s):
slice tool.jpg (57kb) downloaded 0 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
jdi000  
#2 Posted : Sunday, May 23, 2010 3:03:26 PM(UTC)
jdi000

Rank: Administration

Joined: 7/29/2007(UTC)
Posts: 1,862
United States

Thanks: 1 times
Was thanked: 87 time(s) in 81 post(s)
Originally Posted by: chipmaker2 Go to Quoted Post
]I can't seem to split a solid with a plane & I can't do it with project curve to surface/solid. The outline of where the split should be shows up after the operation but no split. See attached. I've shut down and restarted but same results.
Chuck



Hi Chuck


Can you post a sample file?


Regards

Jason
Windows 11, 10
Back to top
chipmaker2  
#3 Posted : Sunday, May 23, 2010 4:29:47 PM(UTC)
chipmaker2

Rank: Senior Member

Joined: 5/24/2008(UTC)
Posts: 129

Was thanked: 1 time(s) in 1 post(s)
Hi Jason
I.m attaching a ViaCad file and a 123 steps I used to get there with a JPG.
Chuck
File Attachment(s):
Split solid problem.vc3 (102kb) downloaded 0 time(s).
chipmaker2 attached the following image(s):
Split problem.jpg (99kb) downloaded 0 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
jdi000  
#4 Posted : Sunday, May 23, 2010 6:11:22 PM(UTC)
jdi000

Rank: Administration

Joined: 7/29/2007(UTC)
Posts: 1,862
United States

Thanks: 1 times
Was thanked: 87 time(s) in 81 post(s)
Hi Chuck


To split the solid use the split solid tool, the cut section tool creates a section view where your defined plane intersects the solid.

Regards

Jason
File Attachment(s):
Split solid problem 2 .vc3 (49kb) downloaded 0 time(s).
jdi000 attached the following image(s):
splitsolid tool.PNG (21kb) downloaded 0 time(s).

You cannot view/download attachments. Try to login or register.
Windows 11, 10
Back to top
chipmaker2  
#5 Posted : Monday, May 24, 2010 9:12:08 PM(UTC)
chipmaker2

Rank: Senior Member

Joined: 5/24/2008(UTC)
Posts: 129

Was thanked: 1 time(s) in 1 post(s)
Hi Jason
Yes that tool works. I was trying initially to split the face as shown by Tim on YouTube at 45 seconds and on.
http://www.youtube.com/watch?v=TlGNHHg1tH8
What he does is he draws a line and imprints it on a solid with the "project curve to surface" tool. It's split the surface and can be used as the axis for rotating using the draft tool.
I tried that with my windows ops using Alt and Ctrl key and no luck yet. Does the "project curve to surface" imprint and split the surface for you? If I can make that work for me that would be real nice.
Chuck
Back to top
jdi000  
#6 Posted : Tuesday, May 25, 2010 4:25:02 AM(UTC)
jdi000

Rank: Administration

Joined: 7/29/2007(UTC)
Posts: 1,862
United States

Thanks: 1 times
Was thanked: 87 time(s) in 81 post(s)
Hi Chuck


Yes, it splits faces, maybe its the projection vector that is being picked not giving you the results you want? See attached with red circles showing the projection vector points I picked and the different results.


Regards

Jason
File Attachment(s):
split face with project curve.vc3 (24kb) downloaded 0 time(s).

You cannot view/download attachments. Try to login or register.
Windows 11, 10
Back to top
ZeroLengthCurve  
#7 Posted : Tuesday, May 25, 2010 3:25:10 PM(UTC)
ZeroLengthCurve

Rank: Senior Member

Joined: 5/15/2008(UTC)
Posts: 993

Thanks: 23 times
Was thanked: 43 time(s) in 27 post(s)
When i have that problem, i find that it sometimes helps to draw an actual surface that extends beyond the edge of what is being cut.

If you are cutting or trimming or splitting a huge surface (say, 40 feet by 50 feet, with compound curves, originating from a mesh...) with many nodes, be careful on doing "undo". i sometimes get a bizarre ACIS error that takes enough ESC or OK presses that i put a book edge on the ESC key. But, one time that caused VCP to crash.... Save, and save OFTEN.

If you get a "file error/unable to open" message and then VCP closes the file open attempt, don't give up just yet. I just Monday AM had that and my heart sank as the file had not been backed up and i recently did 5 days of work on it. In desperation, i chose to just rename and then reattempt to open. Strangely, it worked.
Back to top
chipmaker2  
#8 Posted : Thursday, May 27, 2010 7:26:07 PM(UTC)
chipmaker2

Rank: Senior Member

Joined: 5/24/2008(UTC)
Posts: 129

Was thanked: 1 time(s) in 1 post(s)
Hi Jason
My problem all along has been that after splitting the face I thought I should be able to select that face. However the face can only be selected it seems when editing, for example a face can be selected when extruding or when using the face draft tool.
Problem solved now I get it!
Thanks for your help.
Chuck
Back to top
jdi000  
#9 Posted : Friday, May 28, 2010 4:00:49 AM(UTC)
jdi000

Rank: Administration

Joined: 7/29/2007(UTC)
Posts: 1,862
United States

Thanks: 1 times
Was thanked: 87 time(s) in 81 post(s)
Originally Posted by: chipmaker2 Go to Quoted Post

that after splitting the face I thought I should be able to select that face.
Chuck



Hi Chuck
You can use the deep select tool to pick faces, like if you want to change a face color, etc.

Regards
Jason
jdi000 attached the following image(s):
deep select.PNG (20kb) downloaded 0 time(s).

You cannot view/download attachments. Try to login or register.
Windows 11, 10
Back to top
Users browsing this topic
Guest (5)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET 2.1.2 | YAF.NET © 2003-2024, Yet Another Forum.NET