logo
NOTICE:  This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the Lost Password feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
2 Pages12>
Trimming - Bug (#2124)
Options
Go to last post Go to first unread
Previous Topic Next Topic
unique  
#1 Posted : Tuesday, March 17, 2009 5:56:29 AM(UTC)
unique

Rank: Senior Member

Joined: 6/24/2008(UTC)
Posts: 591
Tim/Ryan,

The Saga still goes on....

See attached image and following steps

1) Create a Smart Polygon
2) Create a vertical single line originating from centre of Polygon going outside
3) Try to trim the line to the polygon - Fails

Also, trimming a smart polygon to another smart polygon - Fails

I know that by exploding the item into entities it works but this shouldnt be necessary in a product like this:cool:

I think some internal exploding etc is in order and maybe a message window with words to that effect ;)
unique attached the following image(s):
trimming.jpg (34kb) downloaded 5 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
Steve.M  
#2 Posted : Saturday, May 2, 2009 11:22:55 PM(UTC)
Steve.M

Rank: Senior Member

Joined: 6/18/2008(UTC)
Posts: 978

Was thanked: 1 time(s) in 1 post(s)
The trimming is a joke. I am getting various failures, even on simple Interpolate splines where if I attempt to trim I just get an "Invalid trim/break"


Bells and wistles being added to shark do not cover up these basic problems. Neither does ignoring posts concerning these bugs.




- Steve
Back to top
unique  
#3 Posted : Sunday, May 3, 2009 9:49:41 AM(UTC)
unique

Rank: Senior Member

Joined: 6/24/2008(UTC)
Posts: 591
Originally Posted by: Steve.M Go to Quoted Post
The trimming is a joke. I am getting various failures, even on simple Interpolate splines where if I attempt to trim I just get an "Invalid trim/break"


Bells and wistles being added to shark do not cover up these basic problems. Neither does ignoring posts concerning these bugs.




- Steve


Yup...I know.

Please post your geometry mate and lets see if its similar to the issues I face with trim ;)
Back to top
ttrw  
#4 Posted : Sunday, May 3, 2009 1:25:46 PM(UTC)
ttrw

Rank: Senior Member

Joined: 4/1/2007(UTC)
Posts: 1,583

Was thanked: 2 time(s) in 2 post(s)
Guys, if you select all (highlight to red), then use the trim tool- it works as expected (I just tried two smart polygons over each other like you said Paul, and used the above suggested method. It again worked as expected).

I think trim tools on the whole, in CAD, are bad- unless you are using Solidworks, which work quite well. Have you guys ever tried using AutoCAD's trim tools? These are even worse that VC's!
Back to top
unique  
#5 Posted : Sunday, May 3, 2009 1:39:51 PM(UTC)
unique

Rank: Senior Member

Joined: 6/24/2008(UTC)
Posts: 591
Originally Posted by: ttrw Go to Quoted Post
Guys, if you select all (highlight to red), then use the trim tool- it works as expected (I just tried two smart polygons over each other like you said Paul, and used the above suggested method. It again worked as expected).

I think trim tools on the whole, in CAD, are bad- unless you are using Solidworks, which work quite well. Have you guys ever tried using AutoCAD's trim tools? These are even worse that VC's!


Hmmmm..are you sure it is a "smart" polygon...Tom ?

No difference here with VC Pro build...pls explain what you are doing to make it work
Back to top
ttrw  
#6 Posted : Sunday, May 3, 2009 1:54:29 PM(UTC)
ttrw

Rank: Senior Member

Joined: 4/1/2007(UTC)
Posts: 1,583

Was thanked: 2 time(s) in 2 post(s)
Yes Paul. Smart polygons. I have no problem with trimming these whatsoever. I do have the pop-up prompt- which you mention, but I just click 'okay' and everything works as expected. Perhaps I misunderstand you? :confused:

Steve, I've noticed that Tim ignores you/us if we have simply made a mistake and have misread the details. But I think this outlines a problem- and that the details- for eg in particular the manual, is badly written, ie there are a definite lack of exercises or examples in how to achieve basic results. Movie files are okay to a point, but don't really help as sometimes they go to fast, especially as you can't see what's being inputted on the keyboard.

Tom
Back to top
ttrw  
#7 Posted : Sunday, May 3, 2009 1:56:52 PM(UTC)
ttrw

Rank: Senior Member

Joined: 4/1/2007(UTC)
Posts: 1,583

Was thanked: 2 time(s) in 2 post(s)
Originally Posted by: unique Go to Quoted Post
pls explain what you are doing to make it work


erm, I thought I just did?

Double click the select tool- which highlights all entities, then use the trim tool to erase the ones/ entities you don't need.

This process works EXACTLY in the same manner as Solidworks' trim tool. :)
Back to top
ttrw  
#8 Posted : Sunday, May 3, 2009 2:12:28 PM(UTC)
ttrw

Rank: Senior Member

Joined: 4/1/2007(UTC)
Posts: 1,583

Was thanked: 2 time(s) in 2 post(s)
Got it to work yet?
Back to top
blowlamp  
#9 Posted : Sunday, May 3, 2009 3:28:22 PM(UTC)
blowlamp

Rank: Senior Member

Joined: 6/28/2008(UTC)
Posts: 648
Tom.
Well I'm really intrigued with this because your method doesn't work for me on smart polygons.
Do you think it works for you because you have an Apple? :eek:

Martin.
Back to top
ttrw  
#10 Posted : Sunday, May 3, 2009 3:40:12 PM(UTC)
ttrw

Rank: Senior Member

Joined: 4/1/2007(UTC)
Posts: 1,583

Was thanked: 2 time(s) in 2 post(s)
:confused:

Well it should work the same regardless of platforms right?

It followed Paul's steps exactly, I also drew two smart polygons- different types. I double-clicked the black arrow on the tool palette, to select all entities, and trimmed off the entities to make a new polygon made from all the other polygons, and took out the entities I didn't need. Then I opened the drawing by erasing the top line and replaced it with a point to poiunt circle, then did the same trim method and made a nice pattern. Then using the extrude tool, made a solid, with a boss, and cut through that using booleans to make a hole. (oh yes, and added a couple of fillets).

Here....
Back to top
ttrw  
#11 Posted : Sunday, May 3, 2009 3:42:27 PM(UTC)
ttrw

Rank: Senior Member

Joined: 4/1/2007(UTC)
Posts: 1,583

Was thanked: 2 time(s) in 2 post(s)
....and a screenshot with pallettes.
ttrw attached the following image(s):
screenshot 13.jpg (20kb) downloaded 5 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
unique  
#12 Posted : Sunday, May 3, 2009 4:03:33 PM(UTC)
unique

Rank: Senior Member

Joined: 6/24/2008(UTC)
Posts: 591
I just hate how these perfectly good constructive posts end up a complete and utter mess:mad::mad:

Tom - You are not following my post because it doesnt work !!
Back to top
blowlamp  
#13 Posted : Sunday, May 3, 2009 4:15:53 PM(UTC)
blowlamp

Rank: Senior Member

Joined: 6/28/2008(UTC)
Posts: 648
One thing's for sure Tom, and that is that it doesn't work in the same way as trimming anything else. Still no worky here :confused:
Back to top
jdi000  
#14 Posted : Sunday, May 3, 2009 4:16:51 PM(UTC)
jdi000

Rank: Administration

Joined: 7/29/2007(UTC)
Posts: 1,862
United States

Thanks: 1 times
Was thanked: 87 time(s) in 81 post(s)
I think Paul's first post explains it in detail Smart Polygons cannot be trimmed probably on purpose. Can't speak for Tim & Co., but IMO you probably don't want smart polygons getting trimmed unless its user initiated as Paul talks about them getting converted to lines internally which would break up the polygon to lines, this could be a warning message to proceed with trim and break up polygons.

The trim tools have had quite a few improvements lately and if Steve posts some geometry that failing I sure it could be fixed.



Jason
Windows 11, 10
Back to top
ttrw  
#15 Posted : Sunday, May 3, 2009 5:35:12 PM(UTC)
ttrw

Rank: Senior Member

Joined: 4/1/2007(UTC)
Posts: 1,583

Was thanked: 2 time(s) in 2 post(s)
Originally Posted by: unique Go to Quoted Post
I just hate how these perfectly good constructive posts end up a complete and utter mess:mad::mad:

Tom - You are not following my post because it doesnt work !!


You don't have to be impatient and rude Paul, but yes, you are right, and I was wrong- I was following your post but I had missed the type of polygon mode box. So I am sorry for that.

I hadn't noticed the difference between single line mode and and smart polygon mode, until Jason suggested that smart polygons can't be modified for a reason- so yes I would tend to agree with what Jason has stated in his post. Isn't this to do with re-dimensioning a polygon after it has been drawn in the object info window? If you were to cut into a smart polygon, you would loose this dimensioning (unless perhaps if you had a parametric constraint attached to it?). However, using single line mode, works with the trim method I described above. I suppose it is exactly there where you would apply constraints, so dimensions could be modified afterwards.

I'm very, very close to buying my own seat of Shark, so I too want to make sure that this stuff work before I shell out 900+ Hence trying to help retrace your steps.

regards,

Tom
Back to top
Tim Olson  
#16 Posted : Sunday, May 3, 2009 7:13:40 PM(UTC)
Tim Olson

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 5,447
United States

Was thanked: 502 time(s) in 353 post(s)
>>1) Create a Smart Polygon
>>2) Create a vertical single line originating from centre of Polygon going >>outside
>>3) Try to trim the line to the polygon - Fails
>>Also, trimming a smart polygon to another smart polygon - Fails

Yup, the trim tool was designed to work with curves.


>>I think some internal exploding etc is in order

Yes good idea. For trimming to a polygon, we could look into internally exploding the polygon and trimming to the resulting curves.

Tim
Tim Olson
IMSI Design/Encore
Back to top
Tim Olson  
#17 Posted : Sunday, May 3, 2009 7:15:08 PM(UTC)
Tim Olson

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 5,447
United States

Was thanked: 502 time(s) in 353 post(s)
>>Please post your geometry mate and lets see if its similar to the issues I >>face with trim

Many thanks to Paul for the trimming examples and movies he has provided via the forum and private email!


Tim
Tim Olson
IMSI Design/Encore
Back to top
Steve.M  
#18 Posted : Monday, May 4, 2009 1:05:04 AM(UTC)
Steve.M

Rank: Senior Member

Joined: 6/18/2008(UTC)
Posts: 978

Was thanked: 1 time(s) in 1 post(s)
A simple Interpolate closed spline, attempt to trim = error
Steve.M attached the following image(s):
2009-05-04_080159.jpg (13kb) downloaded 5 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
Steve.M  
#19 Posted : Monday, May 4, 2009 1:08:46 AM(UTC)
Steve.M

Rank: Senior Member

Joined: 6/18/2008(UTC)
Posts: 978

Was thanked: 1 time(s) in 1 post(s)
Here is the simple example.

This is from VC 2d/3d 833
File Attachment(s):
trim.vc3 (12kb) downloaded 6 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
Steve.M  
#20 Posted : Monday, May 4, 2009 1:39:49 AM(UTC)
Steve.M

Rank: Senior Member

Joined: 6/18/2008(UTC)
Posts: 978

Was thanked: 1 time(s) in 1 post(s)
Originally Posted by: ttrw Go to Quoted Post
Steve, I've noticed that Tim ignores you/us if we have simply made a mistake and have misread the details.


I disagree.

One simple example. I made a bug report of problems with offsets:- http://forum.punchcad.com/showthread.php?t=1469

There was no reply from Tim. Are you saying that was not a bug and it was error from me?
It is now fixed, but shows your comment as incorrect.


- Steve
Back to top
Users browsing this topic
Guest (3)
2 Pages12>
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET 2.1.2 | YAF.NET © 2003-2024, Yet Another Forum.NET