logo
NOTICE:  This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the Lost Password feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Shift with Gripper (#5190)
Options
Go to last post Go to first unread
Previous Topic Next Topic
ALBANO  
#1 Posted : Friday, August 1, 2014 9:13:16 AM(UTC)
ALBANO

Rank: Senior Member

Joined: 2/20/2007(UTC)
Posts: 302
Man
Germany

Thanks: 6 times
Was thanked: 28 time(s) in 15 post(s)
Besides some very good requests concerning the Gripper, I like to ask for shutting the gripper down when holding down the shift key.
I fiddle around with meshes the last weeks and discovered that the gripper is always in the way. Have to rotate the view or zoom to get to my points without being blocket by the griper.
As shift is only needed for selection phase and the Gripper is for the following modifying phase there is no need for the gripper to be visible in the selection phase. (it is after the first item is selected)
It might be ok if it is there but not active.

Another brilliant feature was to have the option of only selecting visible entities. For meshes you could select in shaded mode without checking for accidentally selected vertices on the other side of the object.
Back to top
rokoko  
#2 Posted : Friday, August 1, 2014 11:21:37 AM(UTC)
rokoko

Rank: Senior Member

Joined: 9/28/2013(UTC)
Posts: 345

Thanks: 4 times
Was thanked: 57 time(s) in 45 post(s)
the gripper:
are you aware that you can assign a shortcut key to toggle gripper on/off.

see in short cuts -> window -> gripper
viacad pro 10 powerpackpro, viacad pro 9 german, mac
Back to top
ALBANO  
#3 Posted : Saturday, August 2, 2014 3:08:27 AM(UTC)
ALBANO

Rank: Senior Member

Joined: 2/20/2007(UTC)
Posts: 302
Man
Germany

Thanks: 6 times
Was thanked: 28 time(s) in 15 post(s)
Originally Posted by: rokoko Go to Quoted Post
the gripper:
are you aware that you can assign a shortcut key to toggle gripper on/off.

see in short cuts -> window -> gripper


Danke for the suggestion. Allready using it. :)
But its the year 2014 around 60 years after the first computers. Wasnt the intention of computers to calculate things we can not AND to take over stupid logical tasks? ;)
Back to top
Tim Olson  
#4 Posted : Wednesday, August 13, 2014 11:11:09 AM(UTC)
Tim Olson

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 5,447
United States

Was thanked: 502 time(s) in 353 post(s)
>>have the option of only selecting visible entities. For meshes you could >>select in shaded mode without checking for accidentally selected vertices on >>the other side of the object.

Any suggestions on where we can put a user control that enables/disables back side selections?

Tim
Tim Olson
IMSI Design/Encore
Back to top
ALBANO  
#5 Posted : Wednesday, August 13, 2014 3:59:12 PM(UTC)
ALBANO

Rank: Senior Member

Joined: 2/20/2007(UTC)
Posts: 302
Man
Germany

Thanks: 6 times
Was thanked: 28 time(s) in 15 post(s)
My suggestion was to have the backside selection available only in wireframe mode.
In all other shade modes you would only select without the backside. So you dont need a user switch. And you cant select what you cant see.
Back to top
jlm  
#6 Posted : Wednesday, August 13, 2014 10:59:53 PM(UTC)
jlm

Rank: Senior Member

Joined: 2/18/2007(UTC)
Posts: 1,252
Man
France
Location: Paris & Frankfurt

Thanks: 217 times
Was thanked: 164 time(s) in 101 post(s)
Originally Posted by: ALBANO Go to Quoted Post
My suggestion was to have the backside selection available only in wireframe mode.
In all other shade modes you would only select without the backside. So you dont need a user switch. And you cant select what you cant see.

Hi Albano,
What about display > transparency ?
I use it a lot to see the backside of things ...
Back to top
WWW
ALBANO  
#7 Posted : Thursday, August 14, 2014 2:33:07 AM(UTC)
ALBANO

Rank: Senior Member

Joined: 2/20/2007(UTC)
Posts: 302
Man
Germany

Thanks: 6 times
Was thanked: 28 time(s) in 15 post(s)
Originally Posted by: jlm Go to Quoted Post
Hi Albano,
What about display > transparency ?
I use it a lot to see the backside of things ...


good question!
So we use transparency to see the backside - I think, it is logical to be able to select the points and faces there.
Back to top
Users browsing this topic
Guest (4)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET 2.1.2 | YAF.NET © 2003-2024, Yet Another Forum.NET