logo
NOTICE:  This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the Lost Password feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
General new guy problem (#3945)
Options
Go to last post Go to first unread
Previous Topic Next Topic
ColdMuffookies  
#1 Posted : Tuesday, September 6, 2011 10:46:51 PM(UTC)
ColdMuffookies

Rank: Junior Member

Joined: 9/5/2011(UTC)
Posts: 3
Alright I know there is a model to sheet function but is there a sheet to model?

Along the same lines when I could not foresee a solution I made a general profile of my project and figured I could just use the lathe tool however I get an error saying that there are over lapping curves. I verified that there are none so what am I doing wrong.
Back to top
jol  
#2 Posted : Tuesday, September 6, 2011 11:01:10 PM(UTC)
jol

Rank: Senior Member

Joined: 2/26/2007(UTC)
Posts: 2,156

Was thanked: 1 time(s) in 1 post(s)
first question - no

second question - can you post the profile you are attempting to lathe please
Back to top
ColdMuffookies  
#3 Posted : Wednesday, September 7, 2011 1:51:13 AM(UTC)
ColdMuffookies

Rank: Junior Member

Joined: 9/5/2011(UTC)
Posts: 3
Not a problem thank you for your quick reply I supplied the partial sheet minus dimensions and the outline for the lathe
File Attachment(s):
project1.vc3 (51kb) downloaded 0 time(s).
project2.vc3 (145kb) downloaded 0 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
jol  
#4 Posted : Wednesday, September 7, 2011 2:12:36 AM(UTC)
jol

Rank: Senior Member

Joined: 2/26/2007(UTC)
Posts: 2,156

Was thanked: 1 time(s) in 1 post(s)
On your profile
there is an unwanted
element - a 'control point spline' ... which has zero length

(Tim perhaps you could look at why this is possible - and why the reporting of this spline in not very helpful)

If you fence-select (left to right)
across this exact corner (shown),
you will see that the edit object window reports
'3' elements in it's top bar - instead of the 2 you would expect.

If you delete the extra element, you can then
make a nice lathed object

Hope that helps
jol attached the following image(s):
if.jpg (44kb) downloaded 0 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
ColdMuffookies  
#5 Posted : Wednesday, September 7, 2011 5:20:39 AM(UTC)
ColdMuffookies

Rank: Junior Member

Joined: 9/5/2011(UTC)
Posts: 3
Thank you very much now I can continue on with the build. Your help is much appreciated.
Back to top
Tim Olson  
#6 Posted : Wednesday, September 7, 2011 1:22:06 PM(UTC)
Tim Olson

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 5,447
United States

Was thanked: 502 time(s) in 353 post(s)
(Tim perhaps you could look at why this is possible - and why the reporting of this spline in not very helpful)

I modified the lathe, extrude (all profile based solids) to ignore zero length curves in the next build 990.

Tim
Tim Olson
IMSI Design/Encore
Back to top
Tim Olson  
#7 Posted : Wednesday, September 7, 2011 1:23:08 PM(UTC)
Tim Olson

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 5,447
United States

Was thanked: 502 time(s) in 353 post(s)
Originally Posted by: ColdMuffookies Go to Quoted Post
Thank you very much now I can continue on with the build. Your help is much appreciated.


Did you import the profiles using another file format? If so which format did you use?

Thanks!

Tim
Tim Olson
IMSI Design/Encore
Back to top
ZeroLengthCurve  
#8 Posted : Wednesday, September 7, 2011 3:04:50 PM(UTC)
ZeroLengthCurve

Rank: Senior Member

Joined: 5/15/2008(UTC)
Posts: 993

Thanks: 23 times
Was thanked: 43 time(s) in 27 post(s)
To paraphrase Caprica 6: "We have GOT to clone your brain patterns", but we've GOT to clone Tim. Imagine if there were 6 or 7 of him working like Data when he moved his fingers along the console at near-light speeds, hehehe
Back to top
zumer  
#9 Posted : Thursday, September 8, 2011 4:49:30 AM(UTC)
zumer

Rank: Senior Member

Joined: 11/4/2007(UTC)
Posts: 515

Was thanked: 1 time(s) in 1 post(s)
Sorry, ZLC. Tim is ignoring you in build 990!
Back to top
Users browsing this topic
Guest (4)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET 2.1.2 | YAF.NET © 2003-2024, Yet Another Forum.NET