logo
NOTICE:  This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the Lost Password feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Spacemouse by 3Dconnexion - camera mode only in SharkFXV9? I prefer object mode. - How to switch to the object mode using Spacemouse?
Options
Go to last post Go to first unread
Previous Topic Next Topic
G2Art  
#1 Posted : Tuesday, February 10, 2015 2:19:56 PM(UTC)
G2Art

Rank: Member

Joined: 2/6/2014(UTC)
Posts: 97

Thanks: 29 times
I've just bought a wireless Spacemouse by 3Dconnexion and I regret I did not do it years ago. It's very helpful.

However, it it seems to be working in camera mode only in SharkFXV9 - that is, it allows the user to look at 3D objects from different angles etc. by moving the camera.

Spacemouse's object mode (where you rotate, pan, zoom, etc. the object you are looking at itself rather than moving the camera) seems unavailable in SharkFXV9.

Is there a way to switch to object mode in SharkFXV9? If so, how?

Thanks.

Mark
Mark
www.g2art.com
Back to top
L. Banasky  
#2 Posted : Tuesday, February 10, 2015 5:03:08 PM(UTC)
L. Banasky

Rank: Senior Member

Joined: 2/16/2007(UTC)
Posts: 602

Thanks: 156 times
Was thanked: 150 time(s) in 103 post(s)
Mark,
I don't have the wireless model, but the Disable box under Preferences-User Interface, might be checked.
Larry
L. Banasky attached the following image(s):
3DConnexion.JPG (41kb) downloaded 2 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
G2Art  
#3 Posted : Tuesday, February 10, 2015 7:21:24 PM(UTC)
G2Art

Rank: Member

Joined: 2/6/2014(UTC)
Posts: 97

Thanks: 29 times
Larry,

Thank you. I've seen that check box and tried it but it is there for a different purpose.

I need to find out how to put the Spacemouse in the object mode and take it out of the camera mode.

Mark
www.g2art.com
Back to top
L. Banasky  
#4 Posted : Wednesday, February 11, 2015 4:28:39 AM(UTC)
L. Banasky

Rank: Senior Member

Joined: 2/16/2007(UTC)
Posts: 602

Thanks: 156 times
Was thanked: 150 time(s) in 103 post(s)
Hi Mark,
The wired model I use works fine in SharkFX9, I don't really understand the function of Camera Mode and Object Mode, please explain. I do know that it is important to plug the USB cable,
or in a wireless model the USB receiver, directly to the computer and not a hub or adapter. I know that in Model-To-Sheet, it is recommended to Disable the device, but I
thought it might help to try anything, and see what happens.
Larry
Back to top
L. Banasky  
#5 Posted : Wednesday, February 11, 2015 4:56:32 AM(UTC)
L. Banasky

Rank: Senior Member

Joined: 2/16/2007(UTC)
Posts: 602

Thanks: 156 times
Was thanked: 150 time(s) in 103 post(s)
Hi Mark,
I didn't have much luck editing my previous post. I tried the Camera Mode, see what you mean. I selected the Camera wireframe thing, and deleted it, and the 3D mouse went back
to object.
Larry
Back to top
G2Art  
#6 Posted : Wednesday, February 11, 2015 9:27:17 AM(UTC)
G2Art

Rank: Member

Joined: 2/6/2014(UTC)
Posts: 97

Thanks: 29 times
Larry,

In object mode, when you pull up on the controller, the object is supposed to move (pan) up on the screen. When you push down, the object should move down. In Shark FX v9 I get zoom in / zoom out when I pull up / push down on the controller.

Is that what you are getting in your object mode?

If so, could you please explain in more detail the way you were able to get object mode? I could not follow your explanation from your last post.

Thanks.
Mark
www.g2art.com
Back to top
L. Banasky  
#7 Posted : Wednesday, February 11, 2015 10:30:55 AM(UTC)
L. Banasky

Rank: Senior Member

Joined: 2/16/2007(UTC)
Posts: 602

Thanks: 156 times
Was thanked: 150 time(s) in 103 post(s)
Hi Mark,
If you go to 3DMouse Home-Properties, the program that comes with the controller, you can change the Zoom or Pan to work either way, go to Advanced, and you can also reverse the direction.
To get rid of the camera, just delete the camera direction indicator, wireframe looking object, and object mode is restored.
I did notice something else, if the Disabled box is checked, and you open a file that shows the Top View, the controller will not Rotate the object unless you briefly touch the Navigator to Rotate, then the controller will work.
Larry
L. Banasky attached the following image(s):
3DMouse Home.JPG (79kb) downloaded 5 time(s).
3DConnexion.jpg (87kb) downloaded 4 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
G2Art  
#8 Posted : Wednesday, February 11, 2015 10:53:06 AM(UTC)
G2Art

Rank: Member

Joined: 2/6/2014(UTC)
Posts: 97

Thanks: 29 times
Hi Larry,

That is very clear. Thank you very much for taking the time to help me with this.

I am on a MacPro, and with the new wireless Spacemouse, or maybe it's because it's a Mac, my Properties options are much more limited compared to what you described and showed in your pictures. The things you show are simply not there.

Now I see how it could be done but for the above reasons, I cannot do it.

I noticed there's an option to export and import a configuration under Properties / Configure.

I wonder if you'd mind exporting your configuration and attaching your file. I'd then import your configuration and hopefully it will work on my computer.
Mark
www.g2art.com
Back to top
L. Banasky  
#9 Posted : Wednesday, February 11, 2015 11:52:43 AM(UTC)
L. Banasky

Rank: Senior Member

Joined: 2/16/2007(UTC)
Posts: 602

Thanks: 156 times
Was thanked: 150 time(s) in 103 post(s)
Hi Mark,
The Menu shows that you can save a configuration, but I can't find where it is saved. Anyway, I just use the Default Any-Application configuration. Autodesk Inventor and Sketchup
have a configuration provided by 3DConnexion, but none for Shark. I'll continue to look, and if I locate the file, I will post it.
Larry
Back to top
G2Art  
#10 Posted : Wednesday, February 11, 2015 12:25:37 PM(UTC)
G2Art

Rank: Member

Joined: 2/6/2014(UTC)
Posts: 97

Thanks: 29 times
Hi Larry,

When you choose Export Configuration under Device / Configure, it'll prompt you for a save location.

When I test exported a config to my desktop, the file that was saved was "3Dconnexion.3dc".
G2Art attached the following image(s):
Screen Shot 2015-02-11 at 10.15.45 AM.jpg (70kb) downloaded 1 time(s).
Screen Shot 2015-02-11 at 10.16.07 AM.jpg (52kb) downloaded 1 time(s).

You cannot view/download attachments. Try to login or register.
Mark
www.g2art.com
Back to top
L. Banasky  
#11 Posted : Wednesday, February 11, 2015 2:36:44 PM(UTC)
L. Banasky

Rank: Senior Member

Joined: 2/16/2007(UTC)
Posts: 602

Thanks: 156 times
Was thanked: 150 time(s) in 103 post(s)
Hi Mark,
I was using an older software package, I downloaded and installed the newest version 10 from 3DConnexion. It is different than your screenshots, and completely
different from the previous version that I was using. There is no save or export option, but everything still works.
Larry
Back to top
G2Art  
#12 Posted : Wednesday, February 11, 2015 3:18:03 PM(UTC)
G2Art

Rank: Member

Joined: 2/6/2014(UTC)
Posts: 97

Thanks: 29 times
Thanks for your help, Larry.

I'll call 3Dconnexion's tech support, and if they give me a solution, I'll post it.
Mark
www.g2art.com
Back to top
G2Art  
#13 Posted : Tuesday, February 17, 2015 12:15:26 PM(UTC)
G2Art

Rank: Member

Joined: 2/6/2014(UTC)
Posts: 97

Thanks: 29 times
I spoke with 3Dconnexion's tech support today.

Shark FX is not on their list of supported software.

That could explain the strange behavior I am experiencing with my new Spacemouse Pro Wireless.

Mark
www.g2art.com
Back to top
Tim Olson  
#14 Posted : Tuesday, February 17, 2015 3:59:07 PM(UTC)
Tim Olson

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 5,447
United States

Was thanked: 502 time(s) in 353 post(s)
>>3Dconnexion's tech support today.

They certified ViaCAD 2D3D some years back which is derived from the same code as Shark.

We did have to pull it from the Mac App Store builds as their drivers do not pass Apple requirements. If you have a Mac App Store build and need 3Dconnexion support, contact Encore tech support and they can swap out your build.

Tim

Tim Olson
IMSI Design/Encore
Back to top
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET 2.1.2 | YAF.NET © 2003-2024, Yet Another Forum.NET