logo
NOTICE:  This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the Lost Password feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
pocketing problem - ??
Options
Go to last post Go to first unread
Previous Topic Next Topic
mpix00  
#1 Posted : Saturday, February 28, 2015 7:10:14 PM(UTC)
mpix00

Rank: Junior Member

Joined: 1/21/2015(UTC)
Posts: 28

Thanks: 1 times
I want to use a 4"x3"x.313 thick plate and take my 1/8" flat end mill bit and make circular cuts with 1/4" spacing between each circle and 1/4" depth of cut. The circles go in a "TARGET" pattern like attached file pictarget pattern . Now I made the design on Viacad, but when I save it , than export it to meshcam, when I go to have meshcam run the tool path, it does not recognize the circle cuts. Its just shows the flat 4"x3"x.313 surface. Is there a reason why the circular cuts are not showing?
Back to top
jdi000  
#2 Posted : Saturday, February 28, 2015 9:02:14 PM(UTC)
jdi000

Rank: Administration

Joined: 7/29/2007(UTC)
Posts: 1,862
United States

Thanks: 1 times
Was thanked: 87 time(s) in 81 post(s)
What file format did you export with? Is the circles just curves or did you cut them out of the solid plate in ViaCAD before you exported ?

Regards
Jason

Edited by user Saturday, February 28, 2015 9:03:38 PM(UTC)  | Reason: Not specified

Windows 11, 10
Back to top
mpix00  
#3 Posted : Saturday, February 28, 2015 9:54:25 PM(UTC)
mpix00

Rank: Junior Member

Joined: 1/21/2015(UTC)
Posts: 28

Thanks: 1 times
Originally Posted by: jdi000 Go to Quoted Post
What file format did you export with? Is the circles just curves or did you cut them out of the solid plate in ViaCAD before you exported ?

Regards
Jason


I exported by stl. file format...I cut the circles out of the solid plate in VIACAD before I exported
Back to top
mpix00  
#4 Posted : Monday, March 2, 2015 5:18:35 AM(UTC)
mpix00

Rank: Junior Member

Joined: 1/21/2015(UTC)
Posts: 28

Thanks: 1 times
Any help or suggestions?
Back to top
L. Banasky  
#5 Posted : Monday, March 2, 2015 2:20:34 PM(UTC)
L. Banasky

Rank: Senior Member

Joined: 2/16/2007(UTC)
Posts: 602

Thanks: 153 times
Was thanked: 149 time(s) in 102 post(s)
Try exporting as a .dxf, which Meshcam also accepts, and see if that will work.
Back to top
memphisjed  
#6 Posted : Saturday, March 28, 2015 11:11:27 PM(UTC)
memphisjed

Rank: Senior Member

Joined: 12/19/2010(UTC)
Posts: 115

Thanks: 20 times
Was thanked: 9 time(s) in 8 post(s)
stl files do not have paths, just a dumb surface. if you are exporting with intended tool path no surface/solid should be in the export, just the paths. also check direction with the verify option and you can direct cam into climb or standard cuts (also used in hd plasma).
Back to top
Guest  
#7 Posted : Tuesday, April 7, 2015 8:02:49 AM(UTC)
Guest

Rank: Guest

Joined: 8/27/2014(UTC)
Posts: 394

Was thanked: 13 time(s) in 12 post(s)
Can you please eilapxn why the New Year starts on the 4th Day after Equinox? and why there are 30,30,31 etc would this not make the Calendar have more days than the 364?
Back to top
Guest  
#8 Posted : Tuesday, April 7, 2015 12:54:53 PM(UTC)
Guest

Rank: Guest

Joined: 8/27/2014(UTC)
Posts: 394

Was thanked: 13 time(s) in 12 post(s)
It's simple, anything divided by zero, is zero.
Back to top
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET 2.1.2 | YAF.NET © 2003-2024, Yet Another Forum.NET