logo
NOTICE:  This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the Lost Password feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
points generated by PowerPack verification - points generated by PowerPack verification
Options
Go to last post Go to first unread
Previous Topic Next Topic
thefro  
#1 Posted : Thursday, January 28, 2016 5:23:38 PM(UTC)
thefro

Rank: Senior Member

Joined: 10/28/2014(UTC)
Posts: 92
Man
United Kingdom

Thanks: 7 times
Was thanked: 11 time(s) in 10 post(s)
Hi

is there a way of making/Forcing the points generated by Verifications in PowerPack to Generate on to a separate Verification point Layer?

If not this would be very useful for doing a mass delete after you have sorting out any errors.

Regards

Brian
Back to top
Tim Olson  
#2 Posted : Thursday, January 28, 2016 8:49:20 PM(UTC)
Tim Olson

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 5,447
United States

Was thanked: 502 time(s) in 353 post(s)

Hi Brian

You could set the work layer prior to using the command.

Tim
Tim Olson
IMSI Design/Encore
Back to top
thefro  
#3 Posted : Friday, January 29, 2016 2:10:18 AM(UTC)
thefro

Rank: Senior Member

Joined: 10/28/2014(UTC)
Posts: 92
Man
United Kingdom

Thanks: 7 times
Was thanked: 11 time(s) in 10 post(s)
Hi Tim

i have tried this by setting up a points layer and making that the live layer then running the gap analysis but they are still generated on the layer for the problem objects.

i believe i have done what you said please see screen shot

i tried this on a second attempt and it worked.

i am finding also if not all lines are in the same direction tim it also generates gaps is this correct?


Best Regards

Brian S

Edited by user Friday, January 29, 2016 7:38:52 AM(UTC)  | Reason: Not specified

thefro attached the following image(s):
screenshot_549.png (164kb) downloaded 20 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
Tim Olson  
#4 Posted : Friday, January 29, 2016 11:58:43 AM(UTC)
Tim Olson

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 5,447
United States

Was thanked: 502 time(s) in 353 post(s)
Hi Brian

>>i tried this on a second attempt and it worked.
Concept Explorer was not updating until you clicked the Ok button in the dialog box. I corrected this for 1186 so you see it before you hit Ok.

>>i am finding also if not all lines are in the same direction tim it also generates gaps is this correct?
Direction should not show as a gap. If you have an example where direction is showing up as a gap could you send me the file?

Thanks

Tim
Tim Olson
IMSI Design/Encore
Back to top
thefro  
#5 Posted : Friday, January 29, 2016 2:24:46 PM(UTC)
thefro

Rank: Senior Member

Joined: 10/28/2014(UTC)
Posts: 92
Man
United Kingdom

Thanks: 7 times
Was thanked: 11 time(s) in 10 post(s)
Hi Tim

Is there a better explanation for the use of the tool? on the site?

if it is used by dragging across curves it produces a different result to selecting curves as individuals in a chain the latter generates the points. the explanation on the site is a little vague on the correct use. I'm afraid i have corrected the problem so all curves face i the same direction.

if you look at the example i posted gaps are shown along the bottom of the drawing this is where the lines meet i was surprised these where generated.

i find there are inconsistent results depending on how i select elements in the drawing.

Regards

Brian

Edited by user Friday, January 29, 2016 2:27:58 PM(UTC)  | Reason: Not specified

File Attachment(s):
LMS third Break coach v2 (Test).sfx (989kb) downloaded 6 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
Tim Olson  
#6 Posted : Friday, January 29, 2016 2:35:45 PM(UTC)
Tim Olson

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 5,447
United States

Was thanked: 502 time(s) in 353 post(s)
>> gaps are shown along the bottom of the drawing this is where the lines meet i was surprised these where generated.

A gap is where a curve does not start or end at the start or end of another curve.

If a line starts or ends somewhere along another curve that is not the start or end, that is considered a gap.

In the attached image, the red line will produce a gap.

The tool is usually used in conjunction with checking that a profile is closed for extrusion/lathe/sweep into a solid. ACIS wants an unambiguous closed region.

Tim

Edited by user Friday, January 29, 2016 2:40:24 PM(UTC)  | Reason: Not specified

Tim Olson attached the following image(s):
Screen Shot 2016-01-29 at 2.34.59 PM.png (22kb) downloaded 4 time(s).

You cannot view/download attachments. Try to login or register.
Tim Olson
IMSI Design/Encore
Back to top
thefro  
#7 Posted : Friday, January 29, 2016 3:04:44 PM(UTC)
thefro

Rank: Senior Member

Joined: 10/28/2014(UTC)
Posts: 92
Man
United Kingdom

Thanks: 7 times
Was thanked: 11 time(s) in 10 post(s)
Hi Tim

I had assumed this was the case with the joins but was still surprise things are generated differently in the way i selected the curves?

i find when using the Fillet two lines tool it generates a curve that is slightly offset by a very small amount i have been picking these up with the above tool. not sure why some generate correctly and others do not?

If i can narrow down what is happening i will let you Know i have noticed this happening before in previous builds but have been manually correcting them and not said anything assuming it was me.

Best regards and thank you again for all your help.

Brian
Back to top
Users browsing this topic
Guest (3)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET 2.1.2 | YAF.NET © 2003-2024, Yet Another Forum.NET