logo
NOTICE:  This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the Lost Password feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
"Arc Tool" - additional option would be handy!!
Options
Go to last post Go to first unread
Previous Topic Next Topic
Art Smith  
#1 Posted : Thursday, August 25, 2016 4:18:05 PM(UTC)
Art Smith

Rank: Senior Member

Joined: 1/16/2015(UTC)
Posts: 351

Thanks: 49 times
Was thanked: 43 time(s) in 30 post(s)
a really handy upgrade to the "Arc Tool" for the work I do would be an arc length option: center, start, dialog box for arc length in degrees or current length unit.

a related, but separate, upgrade would be an increase in the "Dimension Tool's" angular resolution to six (6) places to the right of the decimal point from three (3). with the current 6/3 split, arc length uncertainty drives all mixed composition center line lengths. I've found "calculator" (hand held or desktop tool) trigonometric precision is a real crap shoot; single precision, double precision, 16 bit, 32 bit, 64 bit, ......................

Art
[email protected]
Back to top
thanks 2 users thanked Art Smith for this useful post.
GARLIC on 8/26/2016(UTC), ch_hallauer on 2/3/2017(UTC)
Art Smith  
#2 Posted : Tuesday, January 31, 2017 5:28:20 PM(UTC)
Art Smith

Rank: Senior Member

Joined: 1/16/2015(UTC)
Posts: 351

Thanks: 49 times
Was thanked: 43 time(s) in 30 post(s)
just a "back to the top" for a couple of previous suggestions. recently spent several days incorporating a set of new requirements that didn't map well into the baseline geometry. as a consequence got to do way too much calculator work computing associated chord lengths for the new arc lengths that were needed. the calculator application isn't RPN AND doesn't speak degrees (ie: everything had to be converted to radians) so it was effectively a double dose..............

an indigenous RPN calculator tool (think HP 15) would preclude having to use other applications or non-scientific calculators for projects in Shark FX 9. or Powerpack addition....

Previously Posted Suggestions:
a really handy upgrade to the "Arc Tool" for the work I do would be an arc length option: center, start, dialog box for arc length in degrees or current length unit.

a related, but separate, upgrade would be an increase in the "Dimension Tool's" angular resolution to six (6) places to the right of the decimal point from three

Art Smith
[email protected]
Back to top
thanks 1 user thanked Art Smith for this useful post.
GARLIC on 2/1/2017(UTC)
Tim Olson  
#3 Posted : Wednesday, February 1, 2017 11:27:38 AM(UTC)
Tim Olson

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 5,447
United States

Was thanked: 502 time(s) in 353 post(s)
Hi Art

>>a really handy upgrade to the "Arc Tool" for the work I do would be an arc length option:

Yes good idea, will look into!

As a work around you could use the tip below which uses the data entry field. If you type PI into a data entry field, it will fill with ~8 decimals of PI.

Tim

Edited by user Wednesday, February 1, 2017 2:10:47 PM(UTC)  | Reason: Not specified

Tim Olson attached the following image(s):
arcLength.png (130kb) downloaded 11 time(s).

You cannot view/download attachments. Try to login or register.
Tim Olson
IMSI Design/Encore
Back to top
Users browsing this topic
Guest (3)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET 2.1.2 | YAF.NET © 2003-2024, Yet Another Forum.NET