logo
NOTICE:  This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the Lost Password feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Art Smith  
#1 Posted : Wednesday, March 22, 2017 1:50:18 PM(UTC)
Art Smith

Rank: Senior Member

Joined: 1/16/2015(UTC)
Posts: 351

Thanks: 49 times
Was thanked: 43 time(s) in 30 post(s)
manipulating imported STEP objects continues to be an adventure that always ends up "feeling" clumsy and convoluted. given the proficiency of the user, I'm hoping someone can share some process thoughts on how to go about replicating, orienting, and locating imported STEP objects in a quicker more satisfying manner. to date the most common version of this adventure involves importing STEP models of fasteners and then having to "distribute" a number of fastener models in an assembly model. the attached collage is representative, a bolted assembly in need of fasteners and flat washers.................. currently the job eventually gets done but when the adventure is over I always feel like my hands need a thorough washing!

Art
[email protected]
Art Smith attached the following image(s):
manipulating imported STEP objects question.jpg (44kb) downloaded 7 time(s).

You cannot view/download attachments. Try to login or register.
Tim Olson  
#2 Posted : Wednesday, March 22, 2017 3:08:43 PM(UTC)
Tim Olson

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 5,447
United States

Was thanked: 502 time(s) in 353 post(s)
Hi Art


Have you tried the Align or Insert face tool?

The align tool will center one cylindrical object with another.

The insert tool will align and mate in one tool.

Tim
Tim Olson
IMSI Design/Encore
Art Smith  
#3 Posted : Wednesday, March 22, 2017 4:11:04 PM(UTC)
Art Smith

Rank: Senior Member

Joined: 1/16/2015(UTC)
Posts: 351

Thanks: 49 times
Was thanked: 43 time(s) in 30 post(s)
Tim-

thanks! hadn't found or tried the "align face tool". adopting a walk before you run strategy, I attempted to "assemble" a single fastener with a washer both on the same layer. selected faces are shown in the attached collage as well as the "result"......?

assuming the fastener/washer are eventually "assembled", how is that assembly replicated and relocated? none of the faces seem accessible when grouped...........

Art
[email protected]
Art Smith attached the following image(s):
manipulating imported STEP objects question2.jpg (32kb) downloaded 11 time(s).

You cannot view/download attachments. Try to login or register.
Tim Olson  
#4 Posted : Thursday, March 23, 2017 3:17:21 PM(UTC)
Tim Olson

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 5,447
United States

Was thanked: 502 time(s) in 353 post(s)
Hi Art

I made you a quick video showing the Insert tool with a nut/bolt/washer that might help explain the tool further.

http://www.csi-concepts.com/Demo/videos/Insert.mp4

The key is picking cylinder faces to align into the hole, and then planar faces to mate with with any offset needed.

Tim

Edited by user Thursday, March 23, 2017 4:32:24 PM(UTC)  | Reason: Not specified

Tim Olson
IMSI Design/Encore
Art Smith  
#5 Posted : Thursday, March 23, 2017 3:46:23 PM(UTC)
Art Smith

Rank: Senior Member

Joined: 1/16/2015(UTC)
Posts: 351

Thanks: 49 times
Was thanked: 43 time(s) in 30 post(s)
Tim-

thanks much!! didn't realize the two step process was required; only did the first one......

Art
[email protected]
Art Smith  
#6 Posted : Friday, March 24, 2017 2:45:34 AM(UTC)
Art Smith

Rank: Senior Member

Joined: 1/16/2015(UTC)
Posts: 351

Thanks: 49 times
Was thanked: 43 time(s) in 30 post(s)
Tim-

I'm unable, even with the benefit of your video, to "assemble" the fastener and washer in the attached file. is it me or does the downloaded fastener file need to be augmented to use the "assembly tool" ?? the fastener model is straight from McMaster-Carr and representative of the downloaded solid models I'd like to be able to manipulate and replicate......

Art
[email protected]

Edited by user Friday, March 24, 2017 2:47:37 AM(UTC)  | Reason: Not specified

File Attachment(s):
assembly example file.sfx (459kb) downloaded 16 time(s).

You cannot view/download attachments. Try to login or register.
Tim Olson  
#7 Posted : Friday, March 24, 2017 9:31:26 AM(UTC)
Tim Olson

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 5,447
United States

Was thanked: 502 time(s) in 353 post(s)
I will add this example at the end of the video this weekend. Because of the thread, you need pick the cylindrical head face to align with.

Tim
Tim Olson
IMSI Design/Encore
grumpygeek  
#8 Posted : Saturday, March 25, 2017 9:05:51 AM(UTC)
grumpygeek

Rank: Junior Member

Joined: 1/16/2015(UTC)
Posts: 27
Man
United States

Thanks: 3 times
Was thanked: 1 time(s) in 1 post(s)
Wow this is nice, wish I had know about this on my last project. If only there was a full video course on ViaCad, I have been using if for 2 years now and feel like I have barely scratched the surface of what it can so.

Thanks for the videos Tim, they help me a lot.

-Don B.
Art Smith  
#9 Posted : Tuesday, March 28, 2017 10:06:44 AM(UTC)
Art Smith

Rank: Senior Member

Joined: 1/16/2015(UTC)
Posts: 351

Thanks: 49 times
Was thanked: 43 time(s) in 30 post(s)
has anyone that's downloaded my file been able to "assemble" the washer and fastener??

Art
[email protected]
rokoko  
#10 Posted : Tuesday, March 28, 2017 11:55:12 AM(UTC)
rokoko

Rank: Senior Member

Joined: 9/28/2013(UTC)
Posts: 345

Thanks: 4 times
Was thanked: 57 time(s) in 45 post(s)
i did it...

with align tool and the option "centers vertical"

(i deleted two circles that were attached to the washer)

Edited by user Tuesday, March 28, 2017 11:58:11 AM(UTC)  | Reason: Not specified

rokoko attached the following image(s):
centersvertical.png (85kb) downloaded 9 time(s).

You cannot view/download attachments. Try to login or register.
viacad pro 10 powerpackpro, viacad pro 9 german, mac
Art Smith  
#11 Posted : Tuesday, March 28, 2017 12:01:23 PM(UTC)
Art Smith

Rank: Senior Member

Joined: 1/16/2015(UTC)
Posts: 351

Thanks: 49 times
Was thanked: 43 time(s) in 30 post(s)
rokoko-

thanks; circles were the source of my grieve.....!!

given a number of fasteners, does each hole, fastener, and washer need to be done individually?

Art
[email protected]

Edited by user Tuesday, March 28, 2017 12:10:48 PM(UTC)  | Reason: Not specified

horst.w  
#12 Posted : Tuesday, March 28, 2017 12:37:48 PM(UTC)
horst.w

Rank: Senior Member

Joined: 12/21/2014(UTC)
Posts: 209
Germany

Thanks: 4 times
Was thanked: 26 time(s) in 22 post(s)
Originally Posted by: Art Smith Go to Quoted Post
has anyone that's downloaded my file been able to "assemble" the washer and fastener??

Art
[email protected]




... yes, I did it too. But please don't ask me how .... ;-)


H.


PS: I tried it out an other time, it is "a version" of rokokos solution: 2x align, center vertical & horizotal.
both parts must be selected, first the vertical centering and than horizontal centering.

H.

Edited by user Tuesday, March 28, 2017 12:51:34 PM(UTC)  | Reason: Not specified

horst.w attached the following image(s):
Zentrieren.jpg (56kb) downloaded 7 time(s).

You cannot view/download attachments. Try to login or register.
ViaCAD 9 Pro german + ViaCAD 10 Pro & PowerPack + ViaCAD 11, Win7Prof 64 Bit upgraded to Win 10 64 Bit
Tim Olson  
#13 Posted : Tuesday, March 28, 2017 2:12:52 PM(UTC)
Tim Olson

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 5,447
United States

Was thanked: 502 time(s) in 353 post(s)
I updated the video to show more examples.

1. Insert Face
2. Simplify then Insert Face
3. Translate and 3 Point Rotate

Video: https://youtu.be/huRzHvquWxw

Also attached is the file used in the video if you want to try it out. The video and file were made with SharkCAD Pro build 1335 which is now ready for testing.

Beta Download: http://www.masterviacad.com/beta/beta.php


Tim

Edited by user Tuesday, March 28, 2017 2:14:38 PM(UTC)  | Reason: Not specified

File Attachment(s):
insert.sfx (1,328kb) downloaded 12 time(s).

You cannot view/download attachments. Try to login or register.
Tim Olson
IMSI Design/Encore
Art Smith  
#14 Posted : Wednesday, March 29, 2017 8:03:09 PM(UTC)
Art Smith

Rank: Senior Member

Joined: 1/16/2015(UTC)
Posts: 351

Thanks: 49 times
Was thanked: 43 time(s) in 30 post(s)
Tim-

great video; thanks!! how do you keep the "alignment tool" alive while rotating the view??

Art
[email protected]
Users browsing this topic
Guest (6)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.