logo
NOTICE:  This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the Lost Password feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Solid Modeling - Linear grid Pattern
Options
Go to last post Go to first unread
Previous Topic Next Topic
NeuTechFLA  
#1 Posted : Wednesday, December 27, 2017 5:59:23 PM(UTC)
NeuTechFLA

Rank: Guest

Joined: 12/14/2017(UTC)
Posts: 263

Thanks: 31 times
Was thanked: 27 time(s) in 12 post(s)
Ok, noob questions time:

1. I cannot seem to get the Pattern tool to work properly. I tried the Linear Duplicate and got nowhere. The Pattern seems to be asking me the correct questions, I.E. dX dY dZ for the offsets and #X #Y #Z (which I assume means the Number of instances in a particular direction) but I am getting the virtual middle finger when I set dY and #Y to zero (I do not want instances in that direction) Shark tells me it has to be larger than zero. I can only get a pattern of a single Subtract Solid boolean. What is the magic here?

2. Do pattern dimension have to always be positive? In other words, if I want to drive my pattern in the negative direction (relative to my origin) do I have to start in a location that only have positive pattern values?

Thanks....
Back to top
jdi000  
#2 Posted : Wednesday, December 27, 2017 6:02:06 PM(UTC)
jdi000

Rank: Administration

Joined: 7/29/2007(UTC)
Posts: 1,862
United States

Thanks: 1 times
Was thanked: 87 time(s) in 81 post(s)
Hello

Are you trying to duplicate objects on a surface or just duplicate objects in 3d space

Regards

Jason
Windows 11, 10
Back to top
NeuTechFLA  
#3 Posted : Wednesday, December 27, 2017 6:08:49 PM(UTC)
NeuTechFLA

Rank: Guest

Joined: 12/14/2017(UTC)
Posts: 263

Thanks: 31 times
Was thanked: 27 time(s) in 12 post(s)
A simple description is I have a block that is 1" x 2" x 3" (depth) and I have subtracted a .08" diameter hole from it in the lower left corner .125" from each edge. I want to pattern that cut 10 times in the X and 4 times in the Z direction that hopefully results in the a block with a bunch of holes in it. I can only get the pattern to go in one direction at a time...not a grid. What am I missing?
Back to top
NeuTechFLA  
#4 Posted : Thursday, December 28, 2017 7:09:42 AM(UTC)
NeuTechFLA

Rank: Guest

Joined: 12/14/2017(UTC)
Posts: 263

Thanks: 31 times
Was thanked: 27 time(s) in 12 post(s)
I did find the "magic". I finally realized the Pattern tool considers X and Y as the pattern directions on a face irrespective of the Global or a Set coordinate system. Mindset change for me. Which still leaves me with a bit of curiosity. What use then is the dZ and #Z values in a linear pattern? I tried some values for "Z" and it doesn't seem to do anything. Unless the system "sees" the Z items but they are really phantom? (I.E. buried within the model). I am learning this software! :o)
Back to top
L. Banasky  
#5 Posted : Thursday, December 28, 2017 7:36:09 AM(UTC)
L. Banasky

Rank: Senior Member

Joined: 2/16/2007(UTC)
Posts: 602

Thanks: 156 times
Was thanked: 150 time(s) in 103 post(s)
Don't know if this will help, but this is my method for bolt holes
in beams etc. If I understand correctly you want the holes 90 degrees
to one side?
You can rotate the block and subtract.
I work alot with 8020 extrusions, and the extrude bolt pattern results
in smaller file sizes than holes, and I can save the pattern for further use.
Larry

Edited by user Thursday, December 28, 2017 7:37:54 AM(UTC)  | Reason: Not specified

File Attachment(s):
Bolt Holes1.sfx (250kb) downloaded 3 time(s).
L. Banasky attached the following image(s):
Bolt holes.jpg (124kb) downloaded 2 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
thanks 1 user thanked L. Banasky for this useful post.
GARLIC on 12/28/2017(UTC)
NeuTechFLA  
#6 Posted : Thursday, December 28, 2017 8:04:09 AM(UTC)
NeuTechFLA

Rank: Guest

Joined: 12/14/2017(UTC)
Posts: 263

Thanks: 31 times
Was thanked: 27 time(s) in 12 post(s)
I did get the Pattern Tool to work properly. But I am interested to know another method from a Shark veteran. I am not following your description (maybe just Shark terminology). Is "Extrude Bolt Pattern" an actual tool in the software? Also, I see you have two lines that have been segmented. What are you using to create the cut in your block, one extrude that uses all the circles? Were the circles patterned in any way or did you create the circles explicitly at each segment/vertex then drive the cut? Thanks.
Back to top
L. Banasky  
#7 Posted : Thursday, December 28, 2017 8:58:18 AM(UTC)
L. Banasky

Rank: Senior Member

Joined: 2/16/2007(UTC)
Posts: 602

Thanks: 156 times
Was thanked: 150 time(s) in 103 post(s)
Extrude bolt pattern is just something I use.
Your holes were .306 inches center to center, the
segment tool will divide your 2.75 line into
9 segments. I just placed a .080 circle at each segment
and copied them and extruded 2.125.You can do all the
holes at one time with subtract tool.
Larry
Back to top
thanks 1 user thanked L. Banasky for this useful post.
NeuTechFLA on 12/28/2017(UTC)
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET 2.1.2 | YAF.NET © 2003-2024, Yet Another Forum.NET