logo
NOTICE:  This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the Lost Password feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Complex Sweep
Options
Go to last post Go to first unread
Previous Topic Next Topic
CAD Fan  
#1 Posted : Saturday, November 17, 2018 12:59:03 AM(UTC)
CAD Fan

Rank: Guest

Joined: 11/17/2018(UTC)
Posts: 2
Hi,

I have a part that has to be swept across two different paths and I can not find any way to do it, I even tried a two rail sweep! I would greatly appreciate any advice on how to go about modeling this complex part.

Thanks,
CAD Fan
File Attachment(s):
complexsweep1.vc3 (456kb) downloaded 13 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
GARLIC  
#2 Posted : Saturday, November 17, 2018 7:29:11 AM(UTC)
GARLIC

Rank: Guest

Joined: 5/8/2015(UTC)
Posts: 165
Man
Germany

Thanks: 505 times
Was thanked: 84 time(s) in 53 post(s)
Hi CAD Fan:
First of all you have to take the 2 rail curves, which consist of 3 parts each (straight line+arc+straight line) and transform these
into a single curve: go to-
Modify/Trim/Join Curve
Now you will be able to extrude along these 2 curves,
good luck !
Back to top
Jolyon  
#3 Posted : Saturday, November 17, 2018 9:05:17 AM(UTC)
Jolyon

Rank: Guest

Joined: 9/27/2017(UTC)
Posts: 231

Thanks: 1 times
Was thanked: 22 time(s) in 19 post(s)
Can the radius on the upper 'corner' get bigger ?

If so - perhaps you need only follow the (lower) single guide curve

(once joined as suggested)

If not, you'll get distortion at the corner using these two guides as shown

(but maybe that's what you want >?)
Back to top
rockyroad_us  
#4 Posted : Saturday, November 17, 2018 11:12:00 AM(UTC)
rockyroad_us

Rank: Senior Member

Joined: 9/12/2009(UTC)
Posts: 608
Man
United States
Location: In my place

Was thanked: 59 time(s) in 51 post(s)
Originally Posted by: GARLIC Go to Quoted Post
Hi CAD Fan:
First of all you have to take the 2 rail curves, which consist of 3 parts each (straight line+arc+straight line) and transform these
into a single curve: go to-
Modify/Trim/Join Curve
Now you will be able to extrude along these 2 curves,
good luck !


When you do that, the continuity is distorted on the opposite sides of the curve. To keep continuity you have to do it in three sections and join them together. That occurs even with the option feature to maintain height.

Another thing I noticed is that the width between the lines in the lower end is bigger than the other pair in the upper side. I doubt that can be manufactured that way. It appears as if the horizontal portion is to be made smaller. I would think that distance should be the same.
FX 7-FXPro14-1650
MacPro 11.7.4
2x2.8GHz Quad Xeon 32GB
NVIDIA 4 K5000 4GB
Work
Back to top
WWW
CAD Fan  
#5 Posted : Tuesday, November 20, 2018 10:50:27 AM(UTC)
CAD Fan

Rank: Guest

Joined: 11/17/2018(UTC)
Posts: 2
Thank you all for your help, the problem is resolved
Back to top
rockyroad_us  
#6 Posted : Tuesday, November 20, 2018 7:42:21 PM(UTC)
rockyroad_us

Rank: Senior Member

Joined: 9/12/2009(UTC)
Posts: 608
Man
United States
Location: In my place

Was thanked: 59 time(s) in 51 post(s)
It will help others if you posted what you did right or wrong so others can learn from this question.
FX 7-FXPro14-1650
MacPro 11.7.4
2x2.8GHz Quad Xeon 32GB
NVIDIA 4 K5000 4GB
Work
Back to top
WWW
Antoine  
#7 Posted : Wednesday, November 21, 2018 3:42:58 AM(UTC)
Antoine

Rank: Senior Member

Joined: 10/14/2014(UTC)
Posts: 219
Man
Switzerland

Thanks: 2 times
Was thanked: 32 time(s) in 26 post(s)
Quote:
Thank you all for your help, the problem is resolved


Hello CAD fan,

could you show us the result?

Antoine
dayer-design.ch
mrconcepts.ch
SharkFX 12
Back to top
WWW BLOG
Users browsing this topic
Guest (4)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET 2.1.2 | YAF.NET © 2003-2024, Yet Another Forum.NET