logo
NOTICE:  This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the Lost Password feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Gaps detected in profile. - Can't find it (#4137)
Options
Go to last post Go to first unread
Previous Topic Next Topic
radler64  
#1 Posted : Tuesday, January 17, 2012 2:22:10 AM(UTC)
radler64

Rank: Junior Member

Joined: 1/15/2012(UTC)
Posts: 2
Hello,

I have this problem now since days and can't solve it. I am new with Shark FX in general and I am using Version 8.

What did I do?

1. Imported a DXF from my previous 2D CAD solution.
2. Removed some pieces from the drawing. And there are still some pieces in layers which are hidden right now.
3. I made sure, that the whole contour line is one single line. See the picture attached, I was able to hatch it.
4. Now I am trying to extrude it with "Extrude Solid" and I am getting the "Gap detected.." message.

I can not find where the gap should be. So what can I do to extrude it finally and continue with the rest of the work.

Any advice is appreciated.

Thanks for your help.

Dieter
radler64 attached the following image(s):
Screen Shot 2012-01-17 at 9.14.43 AM.jpg (152kb) downloaded 4 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
L. Banasky  
#2 Posted : Tuesday, January 17, 2012 3:27:33 AM(UTC)
L. Banasky

Rank: Senior Member

Joined: 2/16/2007(UTC)
Posts: 602

Thanks: 153 times
Was thanked: 149 time(s) in 102 post(s)
Hi Dieter,
I also have this problem with imported .DXF files. I can't explain how it works, but if I erase a line or 2 and redraw the lines, especially at the end of a radius, the file will extrude. Try this on the file without any hatching.
Larry
Back to top
blowlamp  
#3 Posted : Tuesday, January 17, 2012 3:40:08 AM(UTC)
blowlamp

Rank: Senior Member

Joined: 6/28/2008(UTC)
Posts: 648
As Larry says, try excluding the Hatching in the Extrusion.


Martin.
Back to top
radler64  
#4 Posted : Tuesday, January 17, 2012 6:44:31 AM(UTC)
radler64

Rank: Junior Member

Joined: 1/15/2012(UTC)
Posts: 2
Originally Posted by: L. Banasky Go to Quoted Post
Hi Dieter,
I also have this problem with imported .DXF files. I can't explain how it works, but if I erase a line or 2 and redraw the lines, especially at the end of a radius, the file will extrude. Try this on the file without any hatching.
Larry


I did what you've suggested - and it worked.
I deleted one of the radius and recreated the line.
And I can extrude it now.

Thanks to both of you for the quick help.

Best regards

Dieter
radler64 attached the following image(s):
Screen Shot 2012-01-12 at 1.50.54 PM.jpg (18kb) downloaded 4 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
Users browsing this topic
Guest (2)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET 2.1.2 | YAF.NET © 2003-2024, Yet Another Forum.NET