logo
NOTICE:  This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the Lost Password feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
bug trim surfaces (#1966)
Options
Go to last post Go to first unread
Previous Topic Next Topic
la mouche  
#1 Posted : Tuesday, January 20, 2009 10:01:17 AM(UTC)
la mouche

Rank: Senior Member

Joined: 3/14/2007(UTC)
Posts: 757
Bonjour,

Selon les copies d'©cran ci-dessous, vous constaterez ces anomalies sous CU et SharkFX.

Soit:
1- construisez une surface plane.
2- d©coupez y un trou.
3-faites montrer points sur la surface.
4-essayez d'©diter des points de la surface afin de modifier son aspect.

5- constatez que le logiciel d©truit le travail pr©c©demment fait du trou sur la surface!!!

Un bug que je constate depuis la version Xenon...

Dans ce cas, tout travail surfacique est vou© l'©chec :(

Merci de faire suivre.

Cordialement.

Antoine
la mouche attached the following image(s):
1.jpg (73kb) downloaded 5 time(s).
2.jpg (72kb) downloaded 5 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
ZeroLengthCurve  
#2 Posted : Tuesday, January 20, 2009 12:55:27 PM(UTC)
ZeroLengthCurve

Rank: Senior Member

Joined: 5/15/2008(UTC)
Posts: 1,018

Thanks: 57 times
Was thanked: 54 time(s) in 36 post(s)
Using Babelfish/Altavista/Yahoo, I'll try to help Antoine and the rest of us out:

"Hello,

According to the copies d' screen below, you will note these anomalies under CU and SharkFX.

That is to say:

1- build a plane surface.

2- cut out there a hole.

3-make show points on surface.

4-test d' to publish points of surface in order to modify its aspect.

5- note how the software destroyed the work previously made of the hole on surface!!!

A bug that I note since the Xenon version…

In this case, any surface work is dedicated to l' failure Thanks for making follow.

Cordially.

Antoine"
Back to top
la mouche  
#3 Posted : Wednesday, January 21, 2009 3:58:53 AM(UTC)
la mouche

Rank: Senior Member

Joined: 3/14/2007(UTC)
Posts: 757
Hello,

Here is another case where the work (draw points on z) on a surface destroyed.

Do you have a solution?

thank you in advance.

Antoine
File Attachment(s):
Image 4.jpg (726kb) downloaded 5 time(s).
la mouche attached the following image(s):
Image 3.jpg (29kb) downloaded 5 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
Steve.M  
#4 Posted : Wednesday, January 21, 2009 6:50:44 AM(UTC)
Steve.M

Rank: Senior Member

Joined: 6/18/2008(UTC)
Posts: 978

Was thanked: 1 time(s) in 1 post(s)
I can confirm this problem.


Example from VC (build 823)

I created a surface, projected/embedded the circle, then removed the cut section.(see attached pic+ model). Select the surface then show_points, then adjust one of the control points,.. the cutout is lost.

I exported the surface to check in another program. The surface imported correctly and could have the control points moved without the loss of the cutout, but I did notice that the exported surface did have overlapping CPs on the center section (I have ringed them in the pic)
File Attachment(s):
cut.vc3 (22kb) downloaded 5 time(s).
Steve.M attached the following image(s):
01.jpg (10kb) downloaded 5 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
la mouche  
#5 Posted : Tuesday, February 3, 2009 3:19:04 AM(UTC)
la mouche

Rank: Senior Member

Joined: 3/14/2007(UTC)
Posts: 757
hello,

Answer is possible?

Thanks.

Antoine
Back to top
unique  
#6 Posted : Tuesday, February 3, 2009 4:20:51 AM(UTC)
unique

Rank: Senior Member

Joined: 6/24/2008(UTC)
Posts: 591
Originally Posted by: Steve.M Go to Quoted Post
I can confirm this problem.


Example from VC (build 823)

I created a surface, projected/embedded the circle, then removed the cut section.(see attached pic+ model). Select the surface then show_points, then adjust one of the control points,.. the cutout is lost.

I exported the surface to check in another program. The surface imported correctly and could have the control points moved without the loss of the cutout, but I did notice that the exported surface did have overlapping CPs on the center section (I have ringed them in the pic)


Hi Steve,

Somehow I would not expect this to work in a modeler of this kind. Tweaking "points" is something we do in Rhino or a surface modeler ;)

If you maintain the polysurface (with embedded curve) then modify the curve by editing points or direct input, then explode to surfaces..seems okay.

Just curious what format did you export ?
File Attachment(s):
eg1.vc3 (39kb) downloaded 5 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
la mouche  
#7 Posted : Tuesday, February 3, 2009 4:59:03 AM(UTC)
la mouche

Rank: Senior Member

Joined: 3/14/2007(UTC)
Posts: 757
Hello,

ok thanks for your answer :)

Cordialy

Antoine
Back to top
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET 2.1.2 | YAF.NET © 2003-2025, Yet Another Forum.NET