logo
NOTICE:  This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the Lost Password feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Gripper rotate problem ??? - gripper rotate kills Shark FX9
Options
Go to last post Go to first unread
Previous Topic Next Topic
Art Smith  
#1 Posted : Wednesday, January 20, 2016 6:55:18 PM(UTC)
Art Smith

Rank: Senior Member

Joined: 1/16/2015(UTC)
Posts: 351

Thanks: 49 times
Was thanked: 43 time(s) in 30 post(s)
after the gripper is positioned by the user on a fairly large object, attempting to rotate the object 90 degree about the local X-axis kills Shark FX9 (v9.0.4 Build (1162). the object will rotate with the mouse; I just don't have the skills or patience to input 90.000 degrees via the mounse. anyone have any thoughts on preventing the failure or workarounds?? the object needs to be rotated for alignment with other native objects in global space............

Art
[email protected]

Edited by user Wednesday, January 20, 2016 7:22:44 PM(UTC)  | Reason: Not specified

Art Smith attached the following image(s):
gripper rotate problem.jpg (43kb) downloaded 14 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
Craig  
#2 Posted : Thursday, January 21, 2016 1:49:46 AM(UTC)
Craig

Rank: Senior Member

Joined: 2/26/2009(UTC)
Posts: 383

Thanks: 30 times
Was thanked: 42 time(s) in 36 post(s)
Have you tried rotating it a small amount and then input your required figure in the angle box and hit enter?
Back to top
Art Smith  
#3 Posted : Thursday, January 21, 2016 8:02:46 AM(UTC)
Art Smith

Rank: Senior Member

Joined: 1/16/2015(UTC)
Posts: 351

Thanks: 49 times
Was thanked: 43 time(s) in 30 post(s)
rotating the object a small amount with the mouse first and then using the dialog box for a second rotation doesn't kill Shark, that's an improvement. still not arriving at 90.000 degrees, so there's still a problem. in the experiment I ran, the mouse rotation showing in the angle box was subtracted from 90.000 and then input into the dialog box. using that approach, the object rotation is being reported as 89.9 degrees between features on the object in the two orientations

Art
[email protected]
Back to top
Claus  
#4 Posted : Thursday, January 21, 2016 9:41:19 AM(UTC)
Claus

Rank: Senior Member

Joined: 2/19/2007(UTC)
Posts: 361
Denmark

Thanks: 15 times
Was thanked: 31 time(s) in 27 post(s)
Art, that problem has been fixed in the latest beta.

Claus
Back to top
Art Smith  
#5 Posted : Thursday, January 21, 2016 10:56:36 AM(UTC)
Art Smith

Rank: Senior Member

Joined: 1/16/2015(UTC)
Posts: 351

Thanks: 49 times
Was thanked: 43 time(s) in 30 post(s)
Claus-

thanks!! hopefully it won't be long before it's upgraded for incorporation by all.

Art
[email protected]
Back to top
Claus  
#6 Posted : Thursday, January 21, 2016 11:11:48 AM(UTC)
Claus

Rank: Senior Member

Joined: 2/19/2007(UTC)
Posts: 361
Denmark

Thanks: 15 times
Was thanked: 31 time(s) in 27 post(s)
Art, why dont you just download the beta, I dont remember ever using the official release...
Back to top
Art Smith  
#7 Posted : Thursday, January 21, 2016 3:33:10 PM(UTC)
Art Smith

Rank: Senior Member

Joined: 1/16/2015(UTC)
Posts: 351

Thanks: 49 times
Was thanked: 43 time(s) in 30 post(s)
downloaded 1184 and it works approximately one time in three; both rotation and translation.... the other approximately two times, attempting a rotation or translation kills the program with the same error message as previously posted

Art
[email protected]
Back to top
Craig  
#8 Posted : Thursday, January 21, 2016 4:04:20 PM(UTC)
Craig

Rank: Senior Member

Joined: 2/26/2009(UTC)
Posts: 383

Thanks: 30 times
Was thanked: 42 time(s) in 36 post(s)
Originally Posted by: Art Smith Go to Quoted Post
rotating the object a small amount with the mouse first and then using the dialog box for a second rotation doesn't kill Shark, that's an improvement. still not arriving at 90.000 degrees, so there's still a problem. in the experiment I ran, the mouse rotation showing in the angle box was subtracted from 90.000 and then input into the dialog box. using that approach, the object rotation is being reported as 89.9 degrees between features on the object in the two orientations

Art
[email protected]


Not sure if I understand you correctly but there is no need for subtracting when putting in the required figure.
It does not matter if your initial rotation is 5 or 20 degrees, you still punch in 90 (if that’s what you want), it is only one rotation even though you rotate it manually and then use the input function.
Back to top
Tim Olson  
#9 Posted : Thursday, January 21, 2016 4:26:37 PM(UTC)
Tim Olson

Rank: Senior Member

Joined: 2/2/2007(UTC)
Posts: 5,447
United States

Was thanked: 502 time(s) in 353 post(s)
Originally Posted by: Art Smith Go to Quoted Post
downloaded 1184 and it works approximately one time in three; both rotation and translation.... the other approximately two times, attempting a rotation or translation kills the program with the same error message as previously posted


Hi Art
This sounds repeatable for you. If you want to send this to my dropbox I'll take a look in the debugger.
Tim
Tim Olson
IMSI Design/Encore
Back to top
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET 2.1.2 | YAF.NET © 2003-2024, Yet Another Forum.NET