logo
NOTICE:  This is the new PunchCAD forum. You should have received an email with your new password around August 27, 2014. If you did not, or would like it reset, simply use the Lost Password feature, and enter Answer as the security answer.
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Trim solid at an angle - Trim solid at an angle in the Z plane
Options
Go to last post Go to first unread
Previous Topic Next Topic
mcaliebe  
#1 Posted : Thursday, March 2, 2017 8:09:04 PM(UTC)
mcaliebe

Rank: Guest

Joined: 10/25/2016(UTC)
Posts: 12

Thanks: 1 times
Like many others, I'm new to PunchCad. I am drafting a simple shed and I have a 2x4 that is 8' tall along the z axis. How to I cut the end of the 2x4 at an 18 degree angle? I can't figure out how to even set up a solid triangle as the line reference for an angle only works in the X Y plane, and I need an angle in the face of the Z plane. I hope I've explained myself well enough. Essentially I want to cut my 2x4 along the red line

Edited by user Thursday, March 2, 2017 8:11:18 PM(UTC)  | Reason: add info

mcaliebe attached the following image(s):
Capture.PNG (28kb) downloaded 7 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
GARLIC  
#2 Posted : Friday, March 3, 2017 4:49:59 AM(UTC)
GARLIC

Rank: Guest

Joined: 5/8/2015(UTC)
Posts: 165
Man
Germany

Thanks: 505 times
Was thanked: 84 time(s) in 53 post(s)
You can use the 'Infinite Plane Tool' selecting 'three points in a plane', this will do the job quite easily !

regards
G
Back to top
thanks 1 user thanked GARLIC for this useful post.
specktech on 5/15/2021(UTC)
mcaliebe  
#3 Posted : Friday, March 3, 2017 7:42:46 AM(UTC)
mcaliebe

Rank: Guest

Joined: 10/25/2016(UTC)
Posts: 12

Thanks: 1 times
So I tried the infinite plane tool and understand that I was able to use it to split the solid, however I've not determine 1) how to set the proper angle for the cut, and 2) how I would set the infinite plane onto the solid at this angle.

I'm looking to cut the solid at an 18 degree angle. The line I used in my example was random as I haven't determine how I place anything at a predetermined angle.
Back to top
rokoko  
#4 Posted : Friday, March 3, 2017 8:46:30 AM(UTC)
rokoko

Rank: Senior Member

Joined: 9/28/2013(UTC)
Posts: 345

Thanks: 4 times
Was thanked: 57 time(s) in 45 post(s)
hi, for an 18 degree draft you can use the "draft face" tool. see pictures

Edited by user Friday, March 3, 2017 2:58:54 PM(UTC)  | Reason: typo

rokoko attached the following image(s):
01draftface.png (182kb) downloaded 6 time(s).
02referenceface.png (199kb) downloaded 6 time(s).
03facetodraft.png (132kb) downloaded 6 time(s).
04neutralmidpoint.png (98kb) downloaded 6 time(s).
05result.png (79kb) downloaded 6 time(s).

You cannot view/download attachments. Try to login or register.
viacad pro 10 powerpackpro, viacad pro 9 german, mac
Back to top
thanks 2 users thanked rokoko for this useful post.
GARLIC on 3/3/2017(UTC), specktech on 5/15/2021(UTC)
mcaliebe  
#5 Posted : Friday, March 3, 2017 9:53:16 AM(UTC)
mcaliebe

Rank: Guest

Joined: 10/25/2016(UTC)
Posts: 12

Thanks: 1 times
That worked! Thank you
Back to top
horst.w  
#6 Posted : Friday, March 3, 2017 10:14:48 AM(UTC)
horst.w

Rank: Senior Member

Joined: 12/21/2014(UTC)
Posts: 209
Germany

Thanks: 4 times
Was thanked: 26 time(s) in 22 post(s)
Originally Posted by: mcaliebe Go to Quoted Post
So I tried the infinite plane tool and understand that I was able to use it to split the solid, ....



..... to split or to trim, thats nearly the same and works with the Infinite Plane also fine like the traft tool.

For setting the Infinite Plane you must only set the gripper to "Center of Select" and position it on the axis or to the point you wish to use (here midpoint of the line). The angle you wish to have you can set in the data-entry-box above.

Edited by user Friday, March 3, 2017 10:16:34 AM(UTC)  | Reason: Not specified

horst.w attached the following image(s):
Winkel schneiden.jpg (52kb) downloaded 6 time(s).

You cannot view/download attachments. Try to login or register.
ViaCAD 9 Pro german + ViaCAD 10 Pro & PowerPack + ViaCAD 11, Win7Prof 64 Bit upgraded to Win 10 64 Bit
Back to top
thanks 2 users thanked horst.w for this useful post.
GARLIC on 3/3/2017(UTC), specktech on 5/15/2021(UTC)
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET 2.1.2 | YAF.NET © 2003-2024, Yet Another Forum.NET