Originally Posted by: ale  someone can check here in the files whats the Problem? vc is original size. dfx is 25.4 x bigger.. whats wrong in this export?
vc3 is correct
dxf is 25.4 x bigger In the file Abdeckungen Küche Abzug.dxf, there is a problematic design element: 'Rounded Rectangle'. This is problematic for laser cutting and is exported as a polyline into the DXF file. I have converted it into lines and arcs for you. This works in ViaCAD via File > Change Object Type > Curves. Instead of creating curves, it converts them into lines and arcs. If you simply open the DXF using the Open function in ViaCAD, it will be imported incorrectly. This seems to be a bug in version 15. Therefore, always use the Import function with the correctly set unit to check it.
|
|
You just need to copy all files from C:\Users\%YourUsername%\AppData\Local\Punch!\Shark FX\ to C:\Users\%YourUsername%\AppData\Local\Punch!\SharkCAD15\ while the software is closed. This even works from Shark FX 9 to SharkCAD15 Pro.
|
You can also copy and edit the configuration file "C:\Users\%yourusername%\AppData\Local\Punch!\Shark FX\SFXShortcuts.ini". Code:
[Shortcuts]
CurKeySetName=Shortcuts
Edit:Change Layer=F7 Ö
Edit:Deselect All=N
Edit:Group=y
Edit:Ungroup=<
File:Export=E
File:Import=I
File:Print Layout=P
File:Print SetUp=F13
Layers:Dec Display={
Layers:Inc Display=}
Layers:Isolate Layer=L
Line:HorzConst=H
Line:Single Line=k
Line:VertConst=V
Mesh:Toggle Mesh SubDivision=t
Planes:Select Objects=B
Planes:Show Work Plane=f
Selection:Select Tool=n
Edit:Remove Links=u
Selection:Tape Measure=p
Snap:Snap Anchor Point=A
Verify:Angle=v
Verify:Distance=h
Verify:Length=x
Verify:Properties=o
View:Flip View=e
View:Front View=w
View:Isometric View=q
View:Left View=a
View:Redraw Screen=r
View:Right View=d
View:Top View=s
View:Trimetric View=g
View:Work Plane=b
View:Zoom In=] ! '
View:Zoom Out=? # [
View:Zoom Select=j
Window:Concept Explorer=l
Window:Inspector Attributes=i
Window:Select Mask=m
[Tastaturkürzel]
CurKeySetName=Tastaturkürzel
Analyse:2 Punkt-Abstand=h
Analyse:Eigenschaften=o
Analyse:Länge=x
Analyse:Winkel=v
Ansicht:Ansicht links=a
Ansicht:Ansicht rechts=d
Ansicht:Ansicht umkehren=e
Ansicht:Arbeitsebene=b
Ansicht:Bildschirm auffrischen=r
Ansicht:Draufsicht=s
Ansicht:Isometrisch=q
Ansicht:Trimetrisch=g
Ansicht:Vorderansicht=w
Ansicht:Zoom In=] ! '
Ansicht:Zoom Markierung=j
Ansicht:Zoom Out=[ ? #
Bearbeiten:Alles demarkieren=N
Bearbeiten:Degruppieren=<
Bearbeiten:Gruppieren=y
Bearbeiten:Layer ändern=F7 Ö
Bearbeiten:Verknüpfungen aufheben=u
Datei:Druckereinrichtung=F13
Datei:Exportieren=E
Datei:Importieren=I
Datei:Seite einrichten =P
Ebenen:3 Punkte=G
Ebenen:Arbeitsebene einblenden=f
Ebenen:Objektebene=B
Fangfilter:Fangankerpunkt=A
Fenster:Auswahlmaske=m
Fenster:Concept Explorer=l
Fenster:Fangfilter=,
Fenster:Inspektor-Attribute=i
Layer:Abnehmende Anzeige={
Layer:Layer isoliert anzeigen=L
Layer:Zunehmende Anzeige=}
Linie:Einzellinie=k
Linie:Senkrechte Hilfslinie=V
Linie:Waagrechte Hilfslinie=H
Markieren:Messen=p
Markieren:Werkzeug wählen=n
Polygonnetz:Umschalten Polygonnetz Subdivision=t
|
|
Searching (via "Show by name", part of the Powerpack) is possible within item names. Therefore, it is useful to assign names not only to layers but also to entities. I always use the same name for the solid (entity) as for the layer, and I use one layer per solid.
|
|
The Windows version of version 15 performs better when handling large files with many objects in a single layer. Additionally, the "Linear Duplicate" function works faster. The new limit for objects in a layer appears to be 100,000. Up to this value, I can work smoothly and without delays.
|
I upgraded to SharkCAD 15 Pro and found no errors during my initial tests. Copilot appears to be an integrated web browser with AI support but is as sluggish as the symbol display. Relevant analyses are only possible with a Pro version that isn’t integrated. My favorite bug, where operations are canceled when using Multiselect and In-Stream Zoom commands, hasn’t been fixed. But I can live with that – the developers apparently love that it doesn’t work properly. It is allowed to install the software on multiple computers as long as it is used by only one user. Below is a ChatGPT summary of the license terms. Quote:General License Terms
License Type:
Personal, non-transferable, non-exclusive license to use the software.
Use on multiple computers is allowed, but only one instance can be active at a time.
Backup:
A single backup copy is permitted, e.g., in case of hardware failure.
Restrictions:
No sharing, sublicensing, modification, reverse engineering, or transfer of the software.
Educational licenses cannot be used for commercial purposes.
Warnings and Limitations
Function Limitations:
The software is designed for professional use and does not replace independent design decisions.
Users are responsible for verifying results and ensuring the accuracy of outputs.
Liability Disclaimer:
Encore is not liable for damages or errors caused by using the software.
All use is at the user’s own risk.
Technical Details and License Activation
License Key:
Activation requires an internet connection.
Limited number of installations allowed.
Misuse can lead to license deactivation.
Data Privacy:
Collected data may be stored outside the user’s country.
Encore may disclose data to comply with legal or security requirements.
Legal Basis and Export Restrictions
Export Control:
Software must comply with U.S. export laws.
No redistribution to unauthorized countries.
Jurisdiction:
Governing law: California, USA.
Legal disputes handled in San Francisco, California.
Support and Warranty
Support:
Free support is provided for 6 months; paid plans are available afterward.
Limited Warranty:
Media (e.g., CDs) are covered against defects for 90 days.
No guarantee of error-free software.
Summary
License for personal/professional use with restrictions.
Educational licenses are not for commercial use.
Activation and adherence to license terms are required.
Liability and warranty are strictly limited.
Export and legal disputes are subject to U.S. laws.
This document governs the use and rights of the software and is binding for all users.
|
Originally Posted by: specktech Spacebar works good. But most of my other programs use the Shift key to pan Shift is needed for Multi-Select. Ctrl+Shift are used for the In-Stream-Zoom-Commands. For Rotating can you use also the middle mouse button. Originally Posted by: specktech Grab your model and locate a point along the bottom edge. And pull it down to the origin point. Really helps set your model on the floor/grid. Use just the Translate-Tool and follow the hints "Select move start reference point" and go then to the Precision-Point Window. This can you open at the symbol over the inspector-symbol. With this can you setup the end reference point to your Zero-Point. I never use the grid. Do you really need a grid for your work? Originally Posted by: specktech Zoom way in to verify exactly where you are snapping. Use the In-Stream Zoom Commands. For it. Sometimes it is really hard to snap the right point. But sometimes help me to create a new work plane and changing the snap filter to Plane only. You can change the Work plane to a face with "Work Plane> Select Objects". I set my work planes always with Work-Plane> Select Objects. I have a Keyboard Shortcut for it, this is the best method for changing work planes.
|
|
I have a nice Netbook with a AMD C-70 APU and this Software run there with a very good performance. I guess this Software use the most time just one thread, and if you have 20 Threads are 19 not in use.
Why you dont need the nice rotating-function? This works better than in every other CAD Software.
Rotating the View works also with the Alt+Right Mouse Button, and Changing the Rotating Midpoint works with Alt+RightMouse and CTRL and Click at the right snap point. When the middle mouse button works correctly you need only Middle Mouse+Ctrl+Click at Snap Point for changing the midpoint. This works not with the select tool in hand, because then are the snaps off, but with any other tool in hand.
|
|
And the unroll feature, The unroll feature is slow..... But i have to say, SharkViaPunchCAD is better and it was anyway a waste of money.
Assembling is in SharkViaPunchCAD a Pain, have somebody a alternative low price solution for better assembling? TurboCAD is to slow, I guess 2019/2020 is slower than previous version and i dont know how there assembling works. In TorboCAD is also Construction a pain which is in SharkViaPunchCAD very easy.
|
|
Copy and paste the model to a new file. Delete the history. (File> Compact> "Remove History" and "Purged Deleted") Compact your file every half hour and save it. And do not use groups, make all with layers.
|
Originally Posted by: murrayagain If you've got the list of coordinates, it can be drawn as a 3D polyline by .spl file import, very simple text format. Head the list with POLYLINE, then one coordinate, tab delimited (tab between values, not commas or other punctuations), per line and give the text file .spl as the file attachment, then File|Import|spline and choose your text list. Maybe a workaround to whatever issue you're experiencing, a powerful tool in its own right. Good idea. You apparently get the points by displaying them with selecting and Ctrl+D. AND then you can draw the polyline and discard the spline curve. As far as I’ve tested, this doesn’t work with Edit > Change Object Type.
|
Originally Posted by: jlm Originally Posted by: L. Banasky Does anyone have the option to change colors for Snaps
as shown in the .jpg?
Hello, On Mac, it works ok. But on Mac, you need an upgrade every year for 600 dollars.
|
Originally Posted by: Fey Hallo habe eine Bemassung erstellt und Abgespeichert die Bemassung habe ich DIN2 genannt und diese Bemassung würde ich gerne als Standard nutzen wo kann ich das einstellen
M.F.G.J.Fey Wähle im Inspector die Bemaßungseigenschaften aus (das fünfte Symbol oben). Wenn eine Bemaßung ausgewählt ist, änderst du dort nur die Standards für diese eine Bemaßung. Wenn nichts ausgewählt ist, änderst du die Standards für alle neuen Bemaßungen. Dies wird auch oben im Inspector angezeigt. In Klammern hinter „Bemaßungseigenschaften“ steht „markiert“, wenn eine Bemaßung ausgewählt ist, und „neu“, wenn nichts ausgewählt ist.
Übersetzung auf Englisch: Originally Posted by: Fey Hello, I created and saved a dimension style called DIN2, and I would like to use this dimension style as the default. Where can I set this?
Best regards,
J. Fey Select the dimension properties in the Inspector (the fifth icon at the top). If a dimension is selected, you will only change the standards for that specific dimension. If nothing is selected, you will change the standards for all new dimensions. This is also indicated at the top of the Inspector. In parentheses after “Dimension Properties,” it says “selected” when a dimension is selected, and “new” when nothing is selected.
|
Originally Posted by: relaxibus nie eine Antwort von Tim Olson bekommen. Ich auch nicht. Ich denke, sie mögen keine Benutzer, die auf alten Bugs rumhacken. Betatesting ist viel zu anstrengend. Ich warte ehrlich gesagt lieber auf die finale Veröffentlichung. Ich kann der Microsoft-Copilot-Anbindung nichts abgewinnen und habe deshalb Microsoft Edge (mit Tricks) komplett von meinem PC entfernt. Wenn man den Copilot-Tab aufruft, erscheint nun nur eine Fehlermeldung. :)
|
Originally Posted by: Claus3
Can you share the V15 wip link? I wonder why updates are secret.
Claus
You can always get WIP update links here: http://www.masterviacad.com/beta/beta.php
|
